ACR Electronics Tenbury TEN1MF Manual técnico - Página 2
Procurar online ou descarregar pdf Manual técnico para Fogão ACR Electronics Tenbury TEN1MF. ACR Electronics Tenbury TEN1MF 17 páginas.
Tenbury insert install manual 1015-3 03/12/2015 09:57 Page 2
To ensure that you gain the most from your purchase, please
take a few minutes to read through this manual before lighting
Before installation, please ensure that the correct model has been supplied.
Please make a note of the serial number of your appliance in the space
provided on the front cover of this manual as this will be requested if you
Please also ensure that the commissioning checklist at the rear of the manual
Since April 2002 only registered competent installers can install solid fuel
appliances. Installations carried out by non-registered installers must be
For more information please contact hetas at: www.hetas.co.uk or
• The installation of this appliance must
comply with current Building
Regulations and local regulations,
including those referring to national
and European standards.
• Do not operate this appliance if it
becomes damaged.
• Improper use, maintenance or fitting
parts other than those approved by
the manufacturer could lead to the
appliance becoming damaged or
unsafe which in turn could lead to
personal injury or damage to the
property and will void the warranty.
• The appliance must not be modified in
anyway unless authorised by ACR
Heat Products Ltd.
Important!
the appliance for the first time.
require technical assistance in the future.
is completed in full.
inspected by local authority building control.
telephone: 0845 6345626
• The appliance should be inspected
regularly to ensure the airways are
clean and free from obstruction and
the chimney swept at least once a
year.
• The external surfaces of this
appliance will be very hot to the touch
when in operation and due care will
need to be taken when operating the
appliance to ensure safety. A fire
guard should be fitted if it is likely that
the elderly, infirm or children may
come into contact with the appliance.
• This appliance must not be used as
an incinerator.
• This appliance has been designed for
intermittent operation.