AMCI DC60 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Conversor de multimédia AMCI DC60. AMCI DC60 20 páginas. Multi-turn analog output duracoder

Imprimir página

Overview

The DC60 is a new line of heavy-duty resolver based encoder
products from AMCI. The first units to be released in this line
are absolute multi-turn encoders that offer a current or voltage
analog output.
Units can be ordered with a full scale output over any number
of turns between 1 and 1,024. The analog output has sixteen
bit resolution regardless of the number of turns encoded.
A flange mount unit with its connector on the end is shown in
figure 1. The following mounting styles are available:
2.5 inch flange mount
58 mm servo mount
The following shaft options are available with both mounting
styles
0.375" dia x 0.884" long, w/ 0.047" x 0.77" flat
0.250" dia x 0.884" long, w/ 0.033" x 0.77" flat
6 mm dia x 10.25 mm long, w/ 0.3 mm x 9.5 mm flat
10 mm dia x 20.25 mm long, w/ 0.5 mm x 19.5 mm flat
The following current outputs are available:
4 to 20 mA
0 to 20 mA
The following voltage output is available:
0 to +10 Vdc
An industry standard M12, 8 pin, A-coded, male connector is used as the power and I/O connector. Both end
(axial) and side (radial) connector placement options are available. The body material of the DC60 units is
aluminum with a powder coat finish. Outline drawings of all of the packing options are available in the
line Drawings
section of the manual starting on page 14.

Part Number Description

DC60
MOUNTING
F1 = 2.65" Square Flange
S1 = 58mm Servo Mount
SHAFT SEAL
B = Nitrile Seal, Aluminum Body
V = Viton Seal, Aluminum Body
20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786
Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
DC60 S
PECIFICATIONS
–
SHAFT DIA.
1 = 0.375" dia.
3 = 0.250" dia.
4 = 6 mm dia.
6 = 10 mm dia.
OUTPUT TYPE
C = Current Output
V = Voltage Output
Figure 2 Part Number Description
Figure 1 DC60 Resolver Based Encoder
OUTPUT CODING
Output Type = "C"
1 = 4 to 20 mA
2 = 0 to 20 mA
OUTPUT PERIOD
Output Type = "V"
0001 to 1024:
1 = 0 to +10 Vdc
Notes:
0.375" dia x 0.884" long, w/ 0.047" x 0.77" flat
0.250" dia x 0.884" long, w/ 0.033" x 0.77" flat
6 mm dia x 10.25 mm long, w/ 0.3 mm x 9.5 mm flat
10 mm dia x 20.25 mm long, w/ 0.5 mm x 19.5 mm flat
Out-
CONNECTOR
E = End Connector
S = Side Connector
# of turns for full scale output
7