Amcrest SmartHome AL-KIT1-PP Manual de início rápido - Página 6
Procurar online ou descarregar pdf Manual de início rápido para Sistema de segurança Amcrest SmartHome AL-KIT1-PP. Amcrest SmartHome AL-KIT1-PP 11 páginas. Home alarm system
Também para Amcrest SmartHome AL-KIT1-PP: Manual de início rápido (6 páginas), Manual de início rápido (4 páginas)
Imprimir página
Specifications
Environment
Indoor
Max Detection Distance
Less than 3/4"
Operating
14°F ~ 113°F
Operating Humidity
0-95% RH
Battery
CR1632
Protocol
Bluetooth 5.0
LED Behavior
Please refer to the table below for details regarding the
LED behavior of the device.
Behavior
Flashing Rapidly
Solid (for 2 seconds)
Flashing (3 times)
Flashing Rapidly
(after pairing)
Steady Flash
CHOKING HAZARD
WARNING:
!
KEEP OUT OF REACH OF CHILDREN.
Description
Sensor is pairing.
Pairing successful
Pairing failed.
**Try repeating setup.
Alarm has been triggered.
Firmware upgrade.
Pairing the Sensor
1. Locate the Alarm Hub on
the main menu.
2. Tap on the "+" icon to pair
the sensor to the hub.
3. Follow the on-screen
prompts to finish pairing the
sensor.
4. Test the sensor by moving
the small magnetic portion
along the right side of the
sensor. The LED on the
sensor will flash once it has
detected motion.
It is recommended to keep the small
Note:
magnetic portion 3/4" away from the sesnor.
Do not place the small magnetic portion
11
directly on the sensor.
12