AMD SB600 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Hardware informático AMD SB600. AMD SB600 16 páginas.

Hardware Installation

This motherboard provides a 940-pin surface mount, Zero Insertion Force (ZIF) socket,

referred to as the mPGA940 socket supports AMD Athlon64 processor in the 940 Pin package

utilizes Flip-Chip Pin Grid Array package technology.

The CPU that comes with the motherboard should have a cooling FAN attached to prevent

overheating. If this is not the case, then purchase a correct cooling FAN before you turn on

your system.

WARNING!

Be sure that there is sufficient air circulation across the processor's

heatsink and CPU cooling FAN is working correctly, otherwise it may

cause the processor and motherboard overheat and damage, you may install

an auxiliary cooling FAN, if necessary.

To install a CPU, first turn off your system and remove its cover. Locate the ZIF socket and

open it by first pulling the level sideways away from the socket then upward to a 90-degree

angle. Insert the CPU with the correct orientation as shown below. The notched corner

should point toward the end of the level. Because the CPU has a corner pin for two of the

four corners, the CPU will only fit in the orientation as shown.

When you put the CPU into the ZIF socket， No force require to insert of the CPU, then press

the level to Locate position slightly without any extra force.

2-4

This motherboard provides four 240-pin DDR2 DUAL INLINE MEMORY MODULES

(DIMM) socket for DDR2 memory expansion available from minimum memory volume of

128MB to maximum memory volume of 8.0GB DDR SDRAM.

Valid Memory Configurations

Bank

Bank 0, 1 (DIMM1) DDR2 533/DDR2 667/DDR2 800

Bank 2, 3 (DIMM2) DDR2 533/DDR2 667/DDR2 800

Bank 4, 5 (DIMM3) DDR2 533/DDR2 667/DDR2 800

Bank 6,7 (DIMM4)

Total

Chapter 2

Colden Arrow

240-Pin DIMM

DDR2 533/DDR2 667/DDR2 800

System Memory (Max. 8.0GB)

CPU ZIF mPGAB Socket

PCS

Total Memory

128MB∼2.0GB

128MB∼8.0GB