Amer Mounts AMRP100B Instruções de montagem

Procurar online ou descarregar pdf Instruções de montagem para Racks & Stands Amer Mounts AMRP100B. Amer Mounts AMRP100B 2 páginas.

MOUNTING INSTRUCTIONS

13.6kg(30lbs) max.

Amer Mounts

1-800-262-9703

Fax: 1-800-314-6805

Technical support

1-888-998-918 9

WARNING STATEMENTS

Warning

The ceiling structure must be able to take a load of at

least equal to the maximum weight, 13.6 kilograms

(30lbs). If not, the ceiling must be reinforced. The

correct installation procedure, according to installation

instructions, should be undertaken only by a qualified

service technician.

Failure to do so may result in serious injury or death.

A secure structure must support the weight or load

of the projector mount. When mounting to a wall

that contains wooden studs, make sure to mark the

center of the wooden stud. This must be confirmed

prior to installation of screw fasteners.

Do not install on a structure that is prone to

vibration, movement or chance of impact. Failure

to do so could result in damage to the projector

and/or damage to the mounting surface.

Choose a location recommended by your projector

manufacturer.

Do not install near a heater, fireplace, direct

sunlight, air conditioning or any other source of

direct heat energy. Failure to do so may not only

reduce the performance of your projector, but may

result in damage to the projector and could

increase the risk of fire.

At least two qualified people should perform the

installation procedure. Injury and/or damage can

result from dropping or mishandling the projector

mount assembly.

Recommended hard mounting surfaces: wooden

studs and solid-flat concrete. If the mount is to be

installed on any surface other than wooden studs,

use suitable hardware (which is commercially

available).

amermounts.com

TOOLS REQUIRED NOT INCLUDED