Acre Backrest Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Ajuda à mobilidade Acre Backrest. Acre Backrest 2 páginas. Supporting your lower back while seated, carbon ultralight accessory

Imprimir página

Use of the backrest

The backrest is easily attached in any optional hole on the handle bar, except

the lowest hole. The curved shape ensures optimal support in the lower back,

when you sit on the rollator. The backrest is attached in the opposite direction as

you walk, so you can sit on the part of the rollator where the seat is widest and

get support for your back on the part where the seat is most narrow.

•

Be aware that the backrest is attached correctly before using it. The clips on

the backrest should be completely secured on the rollator's left and right

handle bar without being able to be moved to the side or up and down.

•

Be aware that the backrest is facing correctly (on the opposite side of where

you walk).

•

Be aware

that you need at least one visible hole on the handle bar in order

to attach the backrest.

Attachment - left side

Attach the mounting clip on the backrest to

the handle bar on the rollator. Hold the clip

as shown on the illustration. Push the clip

towards the handle bar until it is attached

around the bar. Be aware that the clips can

still slide up and down the bar at this point.

Tip! The clip is easiest to attach if you push

it onto the handle bar from the side facing

backwards and inwards the seat.

Find the preferred height and turn the clip

counter clockwise until you hear a 'click'. Be

aware that the small peak on the inside of

the clips has to ﬁ t into one of the holes on

the handle bar.

Tip!

You can adjust the backrest to the height that suits you best by either:

1) Attach it in the chosen height or

2) Attach the backrest in the top hole and subsequently adjust the height on

the handles up

or down. Try to adjust the height a bit up and down to see what works best

for you.

Attachment - right side

Repeat step 1 and 2 and push instead the

mounting clip clockwise until you hear a

'click' and the clip is fastened.

Tip! If it is diﬃ cult attach the clips in the

preferred hole, it might help to choose the

top hole and subsequently adjust the handle

height. If attached in the top hole the clip is

moved all the way to the top of the handle

bar before the clip is turned clock-wise and

the clip is fastened.