Acer ASV15-1BP Manual do utilizador - Página 34

Procurar online ou descarregar pdf Manual do utilizador para Monitor Acer ASV15-1BP. Acer ASV15-1BP 36 páginas.

Troubleshooting

Before sending your LCD display for servicing, please check the troubleshooting list

below to see if you can self-diagnose the problem.

1. What if there has no stereoscopic 3D effect performed?

 Check the LED next to the SpatialLabs Eye Tracking Camera Module to see

if it is turned on or not. The LED will be in ember when the Eye Tracking

Camera is working properly.

 Check device manager and see if SpatialLabs Eye Tracking Camera Module

and COM port for 3D display is existing or not.

 Monitor setting

i. If there are 2 or more monitors connected, it must set monitors to

extend mode.

ii. In monitor extend mode, it must set Acer SpatialLabs View Pro as

main display.

2. Why I cannot see the contents in stereoscopic 3D mode?

Several items, as mentioned in the tutorial from SpatialLabs Experience Center

Professional, you can double check if you cannot see Stereoscopic 3D:

 Make sure you have enough environment light (minimum 100 lumen).

 Do not have strong light from the back of the viewer.

 Make sure your whole face is shown, without a mask.

 Align your body and face with the center of the screen.

 The best viewing distance from viewer to screen varies from people; adjust

your distance to find the best distance for you. It should be around 35-75cm

from the screen.

 To ensure the best quality of your experience, plug the device to power at

all times.

 Avoid make big or sudden move.

 This is for one person's view only. Please ensure that no one is behind you

when doing the experience.

 "Camera On" on-screen-display notification shown when launch the Apps

or use SpatialLabs Go, which indicates that Stereoscopic 3D Mode is on.