aero-stream 101893 Manual rápido - Página 2

Procurar online ou descarregar pdf Manual rápido para Sistema de segurança aero-stream 101893. aero-stream 101893 3 páginas.

connections are tight, pinch the large air line after the black "tee"

(on the tank side of the tee) to deadhead the pump. The sound

output of the pump will change. If the light goes out the air switch

is o.k. and go to step 4. If the light does not go out call Aero-

Stream®.

4. Plug the float into the alarm box. Open the septic tank cover.

Make sure the float switch is hanging completely vertically in the

tank. If not, using a stick, push the float downward until the cord

and float are vertical. If the light goes out go to step 5.

5. Allowing the float to hang from its' bracket, adjust the float

switch clamp on the mast upward until the light goes out.

6. If the light does not go out call Aero-Stream®.

Function Configuration

The Aero-ALERT™ can be configured to defeat the audible signal

or defeat the air switch to make the unit function as a high water

alarm only.

1. To defeat the audible signal gently slide the green connector

from the terminal and leave loose inside enclosure (figure 6).

2. To defeat the air switch gently slide the yellow connector from

the terminal and leave loose inside enclosure (figure 6).

Options:

P/N: 101859 - DC Power supply to operate the Aero-ALERT™ on

120 VAC.

Figure 7

PN 101953

To Float

Switch

Figure 4

Figure 5

Figure 6