AeroClave RDS 3110 Manual de resolução de problemas - Página 2
Procurar online ou descarregar pdf Manual de resolução de problemas para Equipamento de limpeza AeroClave RDS 3110. AeroClave RDS 3110 4 páginas.
Também para AeroClave RDS 3110: Manual de referência rápida (5 páginas)
Imprimir página
1) Reassemble the unit using the reverse of initial steps 1-4
2) Run the unit to verify that functionality is restored.
3) If the problem is not resolved, please call your representative
(SYMPTOM: The unit appears to be running normally but is only blowing air from heads)
1) Locate the pump impellers at the bottom right of the unit. These are the 3 white plastic disc
shaped objects
2) Depress the 2 finger tabs located on the side of the impellers. Gently pull the impeller off the
spindle which extends into the impeller.
Rev 3.21
Reassembly Steps
Pump and Filter Check
*If no pump issues please skip to Step 6*
2