American Standard DEEP SOAK 1640.305 Series Manual de instalação e operação - Página 9
Procurar online ou descarregar pdf Manual de instalação e operação para Banheiras American Standard DEEP SOAK 1640.305 Series. American Standard DEEP SOAK 1640.305 Series 14 páginas. Bath waste and overflow with toe tapper drain plug & deck mount bath filler
Imprimir página
FLUENT
®
DECK MOUNT BATH FILLER
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
Flat Blade Screwdriver
Adjustable Wrench
Deep Socket
Channel Locks
*Supplied with Fittings
1
SPOUT ASSEMBLY
Turn off hot and cold water
CAUTION
supplies before begining.
• Install RING WASHER (1) into spout base recess.
Insert SPOUT SHANK (3) through center hole on
mounting surface.
• Assemble RUBBER WASHER (4) and BRASS
WASHER (5) and LOCKNUT (6) onto SPOUT
SHANK (3). Align SPOUT ASSEMBLY and from
underside of ledge secure SPOUT ASSEMBLY
into position with LOCKNUT (6).
3
4
5
6
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
INSTALLATION
INSTRUCTIONS
ROUGHING-IN DIMENSIONS
250 mm
(9-3/4")
*Hex Key
MOUNTING
*Hex Wrench
SURFACE
199 mm
(7-7/8")
SPOUT
ASSEMBLY
SPOUT RECESS
1
MOUNTING
SURFACE
7186.910
165 mm to 305 mm
(ADJ. 6-1/2 TO 12)
219 mm
(8-5/8")
140 mm
(5-3/8")
93 mm
(3-5/8")
29 mm
(1-1/8" DIA.)
(H)
3/4-14 MALE
N.P.T. INLETS
27 mm
(1-1/16" DIA.)
2
PREPARE TUBE AND TEE ASSEMBLY
• Prepare HOSE and TEE ASSEMBLY (1) to fit each VALVE (2).
If necessary, adjust HOSE CONNECTOR (3). Tighten HOSE
CONNECTOR (3) with WRENCH to the VALVE (2). Tighten HOSE
CONNECTOR G1/2 (6) to TEE ASSEMBLY (1).
• Remove HOSE CONNECTOR (3) from each VALVE (2) and
slide onto HOSE (5).
ADJ. 10-1/2 TO 12
NOTE:
VALVE inlets
are 3/4-inch
NPT male.
- 1 -
Certified to comply with ANSI A112.18.1M
35 mm
40 mm
(1-3/8" D.)
(1-5/8")
HOLE
DIA.
32 mm
35 mm
(1-1/4" MAX.)
(1-3/8" MAX)
109 mm
76 mm(3")
(4-5/16" )
1/2" NPT
SHW
(C)
1/2" NPT
305mm
(12" MAX)
3
6
1
6
5
MOUNTING
SURFACE
2
M965798 Rev. 1.0 (3/17)
208 mm
(8-3/16")
53 mm
(2-1/16")
38 mm
(1-1/2" MAX.)
31 mm
(1-3/16" DIA.)
3