AmeriVacS AVS-20 Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Poupança de alimentos AmeriVacS AVS-20. AmeriVacS AVS-20 12 páginas. Retractable nozzle vacuum sealer

Imprimir página

BASIC SERVICE INSTRUCTIONS

PLEASE READ AND UNDERSTAND

REMOVING THE PRESSURE BAR FOR EASIER SERVICING

You can remove the pressure bar for easier servicing by simply removing The

Pressure Bar Bolts. Do not use any tools to hold the Pressure Bar Rods as they

may be damaged. They can only be held from the flat spots at the top of the rod.

When re-installing, please make sure to:

1) Remove the air pressure to the Vacuum Sealer.

2) Push the Nozzle inside the Nozzle Enclosure.

3) Lower the Cylinder rods on each sides

4) Re-install the Pressure Bar making sure there is an internal tooth washer

between the Pressure Bar and the Cylinder Rod, and another on top

against the head of the Bolt.

To order spare parts go to www.AmeriVacS.com and click on "Shop Online" then

THE HEATING ELEMENT (Part No. E- and T-)

Remove the broken Heating Element:

1) Remove 1½" Teflon that covers the old Heating Element.

2) Remove thumb nuts and washers from both sides. Remove Heating

Element.

3) Remove ½" Teflon that was under the Heating Element.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

BEFORE SERVICING

"Replacement Parts"

TestEquipmentDepot.com