Akw GW90 Instruções de instalação - Página 2

Procurar online ou descarregar pdf Instruções de instalação para Produto de canalização Akw GW90. Akw GW90 4 páginas. Shower waste

Installation Instructions

Contents

GW90 with a cover (25404)

Cover

Waste Trap

Body

Locking

Ring

(B)

Locking Ring

Seal (A)

Outlet Pipe & Nut

AKW wastes are designed for low maintenance and reliable operation. The trap valve is located inside

the waste body should be checked as part of a planned maintenance programme.

Keeping your wastes clean

This product should be cleaned periodically to remove any accumulation of hair or other waste

material, using normal domestic bathroom cleaning materials. To clean the waste trap, first remove the

cover to gain access.

Disinfecting

Where disinfecting is necessary, standard procedures for disinfecting equipment should be used,

taking due care and attention to the warning signs concerning possible effects of aggressive

chemicals on plastics. After cleaning, always flush down with water then wipe thoroughly with

a damp cloth to remove any cleaning material residues before drying. Do not use strong or

concentrated acidic, alkaline or other cleaning materials as these may discolour or otherwise

damage the product. Do not use abrasive cloths.