Astro Pneumatic Tool PRN2 Manual - Página 4

Procurar online ou descarregar pdf Manual para Ferramentas de rebitar Astro Pneumatic Tool PRN2. Astro Pneumatic Tool PRN2 6 páginas. 1/2" capacity automatic rivet nut setting kit - metric & sae

Imprimir página
Model:
PRN2
The oil and water extractor should not be mounted on
or near the air compressor.
The temperature of air is greatly increased during
compression. As the air cools down to room
temperature, in the air line, on its way to the Air Power
Tool, the moisture contained in it condenses. Thus, for
maximum effectiveness, the oil and water extractor
should be mounted at some point
Pitch pipe back toward air receiver
Compressor unit
Drain
Daily
MANDRELS / NOSEPIECES PARTS LIST
1
2
3
Index
Part No.
1
PRN2-116
M5 Mandrel
2
PRN2-117
M6 Mandrel
3
PRN2-118
M7 Mandrel
4
PRN2-119
M10 Mandrel
5
PRN2-120
M12 Mandrel
6
PRN2-121
10-24" Mandrel
7
PRN2-122
1/4" Mandrel
8
PRN2-123
5/16" Mandrel
9
PRN2-124
3/8" Mandrel
10
PRN2-125
1/2" Mandrel
SUGGESTED AIR LINE CONNECTION
PIPE SIZE, I.D. (Inches)
Air Flow
CFM
10
20
30
40
50
70
Oil and Water Extractor should be at least 25 ft. from the compressor. Further if possible.
21
11
4
12
5
13
6
Description
Product Type:
1/2" CAPACITY AUTOMATIC RIVET NUT
SETTING KIT - METRIC & SAE
in the air supply system where the temperature of the
compressed air in the line is likely to be lowest. Air
lines must be properly drained daily. Each low point in
an air line acts as a water trap. Such points should be
fitted with an easily accessible drain. See diagram
below. Pitch all air lines back towards the compressor
so that condensed moisture will flow back into the air
receiver where it can be drained off.
Drain daily.
Length of Pipe (feet)
50
100
150
200
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1-1/4"
1-1/4"
25 FEET OR MORE
Qty
11
PRN2-126
12
PRN2-127
1
13
PRN2-128
1
14
PRN2-129
1
15
PRN2-130
1
16
PRN2-131
1
17
PRN2-132
1
18
PRN2-133
1
19
PRN2-134
1
20
PRN2-135
1
21
PRN2-136
1
Page 4
Install drain at
each low point
Oil and Water
Drain
Daily
7
14
8
15
9
16
10
M5 Nosepiece
M6 Nosepiece
M7 Nosepiece
M10 Nosepiece
M12 Nosepiece
10-24" Nosepiece
1/4" Nosepiece
5/16" Nosepiece
3/8" Nosepiece
1/2" Nosepiece
Sleeve
Extractor
Drain Daily
17
18
19
20
1
1
1
1
1
1
1
1
1
1
10