Baumer HUBNER BERLIN HMG 10-EtherCAT Manual de instruções de instalação e funcionamento - Página 4

Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Conversor de multimédia Baumer HUBNER BERLIN HMG 10-EtherCAT. Baumer HUBNER BERLIN HMG 10-EtherCAT 32 páginas. Absolute encoder with magnetic sensing

Imprimir página

IMPORTANT NOTES

1.1

Symbol guide

Warning

)

Disregarding could result in serious injury, death or damage to property

Attention

Disregarding could result in damage to property or damage/malfunction of the en-

coder

Information

Additional information and recommendations

1.2

Intended use

The encoder is a precision measurement device for the acquisition of speed/position in-

formation for the control of drive units and the provision of electronic output signals for

downstream devices�

The encoder must not be used for any other purpose� The function of the encoder is descri-

bed in this mounting instruction� The customer must check the suitability for the purpose

intended�

Mounting and selection must be executed by authorized and qualiied personnel. Moun-

ting, electrical commissioning or any other work with the encoder or system is to be perfor-

med by appropriately qualiied staff only.

Do not put encoder into service if there is any visible evidence of damage�

Do not operate encoder beyond the limit values stated in this mounting instruction�

Any risk of personal injury, damage of the system or company equipment due to failure or

malfunction of the encoder must be eliminated by corresponding safety measures�

Warning

Disregarding intended use could result in serious injury or damage to property�

1.3

Exclusion from liability

The manufacturer is not liable for any damage to persons or property resulting from unin-

tended use of the encoder�

1/29

MB254EN - 11173973, 16A1, Baumer_HMG10-EtherCAT_II_EN