AMPHIBICO PHENOM NX5 SE Manual de instruções - Página 11

Procurar online ou descarregar pdf Manual de instruções para Acessórios para câmaras AMPHIBICO PHENOM NX5 SE. AMPHIBICO PHENOM NX5 SE 14 páginas. Video camera housing sony hxr-nx5 & sony hdr-ax2000

Imprimir página

ZOOMING

On the PHENOM, zooming is achieved either with the zoom

wheel or the right grip's ZOOM-W and ZOOM-T buttons.

Zoom Wheel

The zoom wheel enables you to vary the zoom speed.

ZOOM-W and ZOOM-T

Located on the right grip, the ZOOM-W and ZOOM-T

buttons enables you to zoom through with a constant speed.

Pressing on ZOOM-W will widen the zoom while pressing on

ZOOM-T will result in the opposite being telephoto.

FOCUSING

The camcorder focus on the PHENOM can be set to either

auto or manual focus. To toggle from auto to manual focus,

press down on the AF TOGGLE button while holding down

the shift key.

Manual Focus

In manual focus, you can adjust the focus by using the focus

wheel to fine adjust the focus.

Use the MOMENT AF button (by holding it down) to

temporally auto focus. Letting go will return to manual focus.

Expanded Focus

Press the EXP. FOCUS button to magnify the center of the

screen when in manual focus. Pressing it again will bring

back the screen to its original size.

Zoom and Focus Wheel functionality

Both the zoom and focus wheel operate in the same fashion.

The wheels are spring loaded and maintain a zero (non

active) position when not in use. Applying a little movement

on the wheel in either directions will result in a slow speed.

Increasing the movement on the wheel will accelerate the

speed.

HOUSING & CAMCORDER OPERATION

Right Grip

Zoom Wheel

Left Grip

Focus Wheel

Left Grip

Trigger Button

(shift key)

VIEWFINDER EYEPIECE

The viewfinder eyepiece located on the rear of the housing

may also need adjustment. To adjust, simply turn the inside

ring on the viewfinder CW or CCW to achieve perfect focus

with the camcorder viewfinder. Tighten the locking ring up

against the viewfinder body to lock the eyepiece in place

once adjusted.

REPLACING THE BAYONET LENS

The PHENOM is provided with optional bayonet mounted

lenses. In order to protect these optics, covers are provided

with the lens.

1. To remove the lens, push and hold the button on the lower

right of the front bulkhead and then turn counter clockwise

until the lugs are free from the bayonet ring. Pull gently on

the lens to release it.

2. Remove the covers from the replacement lens. Place

them in a clean and dry environment to avoid any damage.

Make sure the seals on the bottom part of the lens are clean

and free from dust and debris.

3. Put a small amount of lubricant on the O-ring seals and

the sealing surface of the housing.

4. Line up the bayonet lug marked by a hole with the button

on the lower right of the front bulkhead. Push the lens all the

way in until it sits on the bayonet ring and turn clockwise.

You will hear a positive click and the lens will lock into place.

PREPARING CAMCORDER & HOUSING

Adjustment

Ring

Locking Ring

Lens

release button