Ampro NEO Follower 300 Lite Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Destaque Ampro NEO Follower 300 Lite. Ampro NEO Follower 300 Lite 10 páginas. Follow spot powered by a 300w white led
Imprimir página2. INSTALL AND SAFE USAGE
INSTALL THE PORJECTOR
•
Requirement for the installing place: Please do
ensure fasten the mount bracket firmly before
installing. The mount bracket must share the
weight 10 multiple weight of the projector´s.
•
The method of installstion and caution:
Connect the mount bracket well and fix the
clamp firmly to the truss in order to avoid the
projector loose or falling.
•
The projector should be mounted via its clamp
by using 2 bolts. The clamp itself attached
tothe underside of the projector with 4 bolts
provided in the package. Always make sure that
the projector is anchored firmly to avoid any
vibration or falling.
•
For safety the projector should have a
secondary fixing with a safety cord through the
truss and the handle of projector. The safety
cord will fasten the projector on the truss
tightly to avoid any vibration or falling directly if
the clamp or the truss is loose.
•
When installing the projector, not allow any
person pass by.
•
After installing the light. Please inspect
whether the safety cord atrried, clamp or truss
is loose in order to avoid the projector will
slip. If any dangers is happened by falling, the
manufacturer won´t be responsible for it.
•
Other safety terms: Mininum distance between
the projector´s shot & goal project:
•
•
Picture 1
•
•
When fix the orientation of the projector.
Please keep the minimum distance between
the flammable retarding subject and the
porjector´s shot is 0.8M at least. (Picture1)
But the minimum distance between the
inflammable and the projector´s lens should be
P. 4
Neo Follower 300 Lite - English version
kept away 2m at least. (Picture2).
•
The minimum distance between the inflaming
retarding subject and any other part of the
light: When fix the orientation of the projector.
Please keep the minimum distance between
the inflaming retarding subject and the
projector shot is 0.3m at least.
•
MAX ambient temperature: In order to ensure
the light could operate normally, the ambient
te- mperature couldn´t be highter than 33
degree and no lower than 2 degree.
•
Electric shock and static electricity portection:
These projectors are designed depends on
the electric shock protection, the projector
should be connected when the power supply is
enough. The projectors ground cable should be
connected with the ground cable of the power
supply system as well.
•
Surface temperature: Under normal condition,
the highest sectional surface temperature may
be up to 90-120 degree.
•
Connect the main power supply: Connecting
the main power supply should be done by the
professional person.
Picture 2