AMSOIL BMK-17Ea Instruções de instalação e manutenção - Página 3
Procurar online ou descarregar pdf Instruções de instalação e manutenção para Sistemas de filtragem de água AMSOIL BMK-17Ea. AMSOIL BMK-17Ea 6 páginas. Dual remote filtration system
Imprimir páginaMounting Angle Diagram C
(Recommendations are the same right to left and front to back)
Mounting angle above horizontal is not recommended
180°
160°
ACCEPTABLE
ANGLE
130°
Diagram D
Minimum Bend Radius
(Actual size)
Diagram E
SEALANT
NO SEALANT
ON FIRST 1-2 THREADS
Note:
If Teflon tape is used, it should be wrapped no more
1
than 1
⁄
to 2 turns in a clockwise direction when
2
viewed from the thread end.
Caution: More than two turns of tape may cause distortion or
cracking of the port.
Never back off (loosen) pipe threaded connectors to
achieve alignment.
PREFERRED MOUNTING ANGLE
1
1
⁄
(1.5)
2
13
⁄
I.D. Hose BP-250
32
AREA
HORIZONTAL
0°
20°
ACCEPTABLE
ANGLE
50°
Diagram F
1. Place socket in vice and screw in hose
counter-clockwise until hose bottoms. Back
1
hose out
⁄
turn.
2
2. Oil inside of hose and nipple threads liberally
with oil. Do not oil hose cover.
3. Screw nipple assembly into socket using
wrench on nipple hex until nipple hex
shoulders against socket.
Mounting Template
1
⁄
4
1
2
⁄
4
(2.25)
(.25)
5
1
⁄
16
(1.3125)