Advanced Elements AdvancedFrame AE1012 Manual do Proprietário - Página 9
Procurar online ou descarregar pdf Manual do Proprietário para Barco Advanced Elements AdvancedFrame AE1012. Advanced Elements AdvancedFrame AE1012 20 páginas. 1 person kayak
Também para Advanced Elements AdvancedFrame AE1012: Manual do Proprietário (19 páginas), Manual do Proprietário (20 páginas)
Imprimir página
3.3 Inflating
IMPORTANT: Before inflating, check to be sure that the kayak is completely assembled. Inflate
your kayak in the following order. Failure to follow these instructions may cause damage to
your kayak. Do not over inflate.
1. Partially inflate chamber 1 until the kayak begins to fill out or appears to be half way inflated
then close cap. Check to be sure the valve is in the inflate position (See Figure 1).
2. Inflate chamber 2 until the AdvancedFrame™ tube is firm to touch (2.0 psi ONLY).
3. Inflate chamber 3 "floor" (using appropriate fitting). Twist valve open to inflate and twist
closed when complete (See Figure 2). Fill until firm. Do Not Over-Inflate! (1.0 psi ONLY)
4. Inflate Coaming chambers 4 & 5 until firm. Never over-inflate! (1.0 psi ONLY)
5. Inflate chamber 6 & 7/8 & 9 for desired deck lift. Never over-inflate! (1.0 psi ONLY)
6. Make sure all valves are closed tightly and properly.
7. Finally, Insert Plastic Bow and Stern forms into pocket on bow and stern (Figure 3).
AdvancedFrame Expedition™ Inflatable Kayak Owner's Manual
Diagram of Inflation Chambers
Figure 3. Plastic Bow and Stern Insert