Electrolux 10 GN2/1 Manual de instalação - Página 23

Procurar online ou descarregar pdf Manual de instalação para Congelador Electrolux 10 GN2/1. Electrolux 10 GN2/1 34 páginas. Electrical combi oven, touch and digital
Também para Electrolux 10 GN2/1: Manual (3 páginas)

Imprimir página

Electrolux 10 GN2/1 Manual de instalação

6 – 10 GN models

20 GN models

CAUTION

The appliance must be level.

E.4.4

Tabletop models

For safety reasons, tabletop models should only be placed on

top a manufacturer-original oven stand or cupboard structure.

Choose the appropriate structure in the accessories catalogue

according to your model.

Mounting onto an oven stand (size GN 1/1 – 2/1)

1. Replace the oven feet with the special feet supplied with

the oven stand accessory.

2. Place the appliance onto the oven stand by inserting the

locating feet into the tubular uprights.

Mounting onto a cupboard (sizes GN 1/1 – 2/1)

1. Disassemble the rear panel "B" and control panel "A" (if

expected);

2. Replace the oven feet with the special feet supplied with

the cupboard accessory;

3. Place the appliance onto the cupboard by inserting the

locating feet into the tubular uprights;

4. Refit the control panel "A" and the rear panel "B".

5. Proceed with the oven connections.

IMPORTANT

The connection pipes of the oven can be run

either on the back either on the side.

• remove and replace the panels "C" and "D"

between them;

• remove the pre-cutted plates "E" and "F" to let

the drain pipe pass through the hole on the

back or at the side;