Electrolux A75235-GA3 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Congelador Electrolux A75235-GA3. Electrolux A75235-GA3 20 páginas. Electrolux freezer

COOLMATIC function

When the appliance is used as a fridge.

The maximum performance is obtained by setting the COOLMATIC function. It's recom‐

mended when loading large quantities of food.

To activate the function, do these steps:

1. Press the TURBO FROSTMATIC button.

2. The TURBO FROSTMATIC indicator will light up and the Temperature indicator shows

IC.

To deactivate the function, do these steps:

1. Press the TURBO FROSTMATIC button.

2. The TURBO FROSTMATIC indicator goes out.

The COOLMATIC function stops automatically after about 6 hours.

When the appliance is used as a freezer:

Temperature increase in the freezing mode (for example due to an earlier power failure or

door is open) is indicated by:

• Alarm light flashing

• flashing temperature

• sounding of buzzer

When normal conditions are restored:

• the acoustic alarm stops

• the temperature value continues to flash

• the Alarm light continues to flash

When you press the Alarm reset button to deactivate the alarm, the highest temperature

reached in the compartment appears on indicator

Then it returns on the normal operation showing the temperature of the selected com‐

partment.

During the alarm phase, the buzzer can be switched off by pressing the Alarm reset button.

High temperature alarm

When the appliance is used as a fridge:

Temperature increase in the cooling mode (for example due to an earlier power failure or

door is open) is indicated by:

• Alarm light flashing

• flashing temperature

• sounding of buzzer

When normal conditions are restored:

• the acoustic alarm stops

• the temperature value stops flash

• the Alarm light stops

During the alarm phase, the buzzer can be switched off by pressing the Alarm reset button.

An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm

conditions are indicated by:

• Alarm light flashing

Control panel

for some seconds.