ATIGO A3101 Manual de instalação - Página 4

Procurar online ou descarregar pdf Manual de instalação para Sistema de intercomunicação ATIGO A3101. ATIGO A3101 7 páginas. 2-wire video system
Também para ATIGO A3101: Manual de instalação (11 páginas), Manual de instalação (15 páginas)

Imprimir página
Video module functions and
programming
Restore factory settings.
With Camera Module in standby, short out the
Exit Button Ports (EB+ and EB-) and toggle
DIP switch 6 four times.
A long Beep will sound, and all three indicators
will blink at the same time meaning the
Restore Factory Settings is in progress.
Once the three Indicators turn off with a
warning sound of a long Beep, it means the
Restore Factory Settings is complete.
Activate Programming mode and
touch keys, A and B
Key A and key B cannot be used on the
camera module until activated.
To activate the keys and set the unit to
programming mode, put DIP switch 6 to ON
position.
DIP switch 6 must be set to ON.
Other DIP switches must be set to OFF.
When programming is finished, put DIP switch
6 back to OFF position.
4 |
P a g e
Sound theme settings.
When the Camera Module is in programming
mode:
1.
Press and hold Key A for 3 seconds to
enter the Sound Theme Mode.
2.
The Status indicator will turn on and
current theme sound, will play.
3.
Press Key A again to play the next theme.
4.
Press Key B to exit.
Sound volume settings.
When the Camera Module is in programming
mode:
1.
Press Key B to enter Tune Volume
Setting, the Talk indicator will turn on and
play the sound at the current volume.
2.
Press Key A to increase/decrease the
volume (loop setting)
3.
Press Key B to exit.
Talk volume settings.
1.
During the conversation, press and hold
Key B for 3 seconds to enter the Talk
Volume Setting.
The Talk indicator will turn on with a long
Beep followed by a short Beep.
2.
Press Key A to increase/decrease the
volume (loop setting).
3.
Press Key B to exit.