Dreamline ENIGMA-Z SHDR-62606210-08 Manual de instruções de instalação - Página 13

Procurar online ou descarregar pdf Manual de instruções de instalação para Produto de canalização Dreamline ENIGMA-Z SHDR-62606210-08. Dreamline ENIGMA-Z SHDR-62606210-08 20 páginas. Shower door & tub door

Imprimir página

NOTE: Before you install the Stationary glass (#02), bring the

Door Glass (#05) into the shower and lean it against the wall.

Make sure the door is facing in the direction that it will be

installed. After the Stationary glass (#02) is installed, it may

not be possible to easily get the door glass into the shower.

Always use padding to protect the door glass and shower

surfaces.

NOTE: Do Not attach the handle to the door glass until

instructed to do so.

Do Not attempt to lift the door glass with the handle as this

may result in damage to the glass and/or serious personal

injury. Use a professional grade glass suction cup and an

assistant.

10.

Fasten the Wall bracket (#19) to

the wall using the Truss head screw

ST4.2×55 (#18).

Mount the base of the Guide Rail

brackets (#08) onto both walls using

the Large Truss Head screw ST6×65

(#10).

Note that the adjustment set

screws must be aligned vertically for

easier access to adjust for level after the

glass is installed. (Fig 11.2 & 11.3)

See Fig. 11 for details

11.

Apply silicone to the bottom of the

Anti-splash guard (#15) and the Guide

block (#12). Insert one end of the

Anti-splash guard(#15) fully into the Guide

block (#12) and align both pieces on the

threshold or tub deck using the marks made

in Step #7. Apply silicone to the Anti-splash

guard cap (#16), and place it at the wall end

of the Anti-splash guard(#15). Apply

several strips of painter's tape to hold the

Anti-splash guard(#15) and cap in place

while the silicone cures.

ENIGMA-Z manual Ver 1 Rev 4 10/2016

See Fig. 12 for details

protective

padding

Fig. 11

Fig. 12

protective

padding

Painter's Tape