Dreamline UNIDOOR Instruções de instalação - Página 8

Procurar online ou descarregar pdf Instruções de instalação para Invólucro Dreamline UNIDOOR. Dreamline UNIDOOR 13 páginas. Shower door

the wall and insert the Wall anchors (13) into the holes.

Apply silicone along the Wall profile and around the holes. Fasten the Wall profile to the wall

with the Round head Screw ST4.2×30 (15). Then push the Stationary glass and Glass profile

assembly into the Wall profile.

See Fig. 10 for details.

11. Adjust the Stationary glass position to ensure

that when the glass door is closed, there is a gap

(1/16"-1/8") between the two glass panels.

To adjust and secure the stationary glass in place,

install the Bottom Bracket (19) to the Stationary

glass;

Mark the drilling hole for the bracket. Make sure

the mark is clear and visible and drill the hole

using Ø 1/8" drill bit.

Use the Round head screws ST4.2×25 (16) to

attach the Bottom Bracket (19) to the shower

base or the threshold. Cover the screw head with

Decorative cover (18).

See Fig. 11 for details.

12. After final adjustments of the Stationary glass

drill the holes in the Glass profile through

predrilled holes in the Wall profile using Ø 1/8" drill bit.

NOTE: You only need to drill through the first layer of the Glass

Profile.

Use Countersunk screws ST4.2×18 (14) to attach the Wall

profile to the Glass profile. Cover the exposed screw heads with

Decorative Plugs (17).

See Fig. 12 and Fig. 13 for details.

Rev 2.1

Fig

. 10

(1/16--1/8)"

Ø 1/8"

Fig

. 11

Ø 1/8"