DREAMS DAWSON OTTOMAN SOUND BED with O.S.B. Manual de instruções de montagem - Página 13
Procurar online ou descarregar pdf Manual de instruções de montagem para Mobiliário de interior DREAMS DAWSON OTTOMAN SOUND BED with O.S.B.. DREAMS DAWSON OTTOMAN SOUND BED with O.S.B. 18 páginas. Single size
11
Fit the mattress stopper (H).
12
Unpack the contents of the Ottoman Support Bar
(O.S.B.) from it's carton - this is packed inside Pack 3.
i)
To underneath of the slat frame, fit the parking
bracket (P). This is used to safely keep the
support bar out of the way when not in use. Use
one bolt set (m, b & c) - please make sure the
bracket is fitted the correct way round as
shown. Screw into the threaded insert on the
underside of the frame.
To underneath of the slat frame, fit
ii)
the O.S.B. support bar (M) as shown.
Using two bolt sets (m, b & c), screw
the bolts into into the threaded inserts
on the underside of the frame.
Please do tighten 100% yet.
M
c
b
m
iii)
Fit the fixed retaining bracket (N)
to the side rail using two bolt sets
(m, b, & c). Screw the bolts into
the threaded inserts on the side
rail. Make certain the bracket is
level and at the correct height.
Please do not tighten 100% yet.
100%
N
Dawson Ottoman Sound Bed - Assembly guide - Page 13
100%
c
P
b
m
c
i v)
The bolts should be in the centre of the
b
m
long holes and one may need to slide
the inner bar and the bracket, up or
down so the bottom of the O.S.B stem
90%
just touches the surface - better to do
this AFTER the mattress is fitted.
Push the mattress
stopper (H) into the end
of the metal slat frame,
the legs should go all the
way through the upper &
lower metal sections.
b
c
d
m
x5
x5
x1
x5