ANDILOG CENTORMETER EASY Manual de instruções - Página 7
Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição ANDILOG CENTORMETER EASY. ANDILOG CENTORMETER EASY 16 páginas. Torque analyzer v1.0
Imprimir página4. Starting your torque analyzer CENTORMETER EASY
Press the I/O button, the information screen showing the status of the CENTORMETER force
gauge is displayed for 5 seconds and then the main screen is displayed.
Software version
Software version: the line indicates the software version installed on the force gauge.
Current date: displayed according to the format: DD / MM / YYYY.
Battery information:
When the battery is low, a low battery message is displayed on the screen as the gauge is
turned on, before carrying out tests.
If the charger is connected, the message « CHARG » will be displayed.
While displaying low battery indication, CENTORMETER gauge runs internal tests. If during these
tests, problems are detected, the internal information screen is displayed.
An error message indicates that the gauge is not in optimum operating condition for measuring.
Please see the Appendices chapter for the meaning of indications and error messages.
If the error detected makes measurement impossible (defective sensor for example), the display
will hold and it will be impossible to take any further action. Then return the instrument to
ANDILOG TECHNOLOGIES for examination.
If the error detected does not make measurement impossible (low battery for example) you can
switch to the main screen by pressing MAX button.
ANDILOG
CENTORM EASY
V 3 . 3 6
DATE:
01/01/2015
BAT :100%
- 6 -
Operating manual – V1.0
CENTORMETER EASY
Gauge version
Battery information