ANDILOG CENTORMETER EASY Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição ANDILOG CENTORMETER EASY. ANDILOG CENTORMETER EASY 16 páginas. Torque analyzer v1.0

Imprimir página

5. Display mode

NOTE: Described here are manufacturer settings, prepared by ANDILOG TECHNOLOGIES for

delivery.

Sensor Capacity

Line 1

Line 2

When turned on, CENTORMETER force gauge displays a small square in the middle of main

screen (line 1). This small square slides from left to right and then the value of the force applied

to the force gauge sensor appears on line 1 in big letters. If no force is applied, CENTORMETER

force gauge displays « 0 ».

Sensor Capacity: the range of the sensor detected can be displayed at any time, even for

additional external sensor.

Measure unit: indicates the unit used for the display. Several units are available. Press the

"UNIT" button to change the measure unit.

Line 1: displays the current reading.

Time Bar graph: a black line is the representation of the time.

Line 2: displays the maximum, minimum, current values and calculations. Could be selected by

pressing "MAX" button.

Status line: Low battery indication: pictogram indicating the battery power status via 4

horizontal lines which respectively symbolize 25%, 50%, 75% and 100% of power. When adaptor

is connected, this pictogram flashes.

3 N m

+0000

M X I + 0 0 . 0 0

V L I

- 7 -

Operating manual – V1.0

CENTORMETER EASY

Measure Unit

Time Bar graph

Status line