Andrew 75E LFL Antenna Manual de instruções de montagem - Página 8

Procurar online ou descarregar pdf Manual de instruções de montagem para Antena Andrew 75E LFL Antenna. Andrew 75E LFL Antenna 15 páginas. Rxtx antenna and co-located antenna systems
Também para Andrew 75E LFL Antenna: Manual de instruções de montagem (13 páginas), Manual de instruções de montagem (12 páginas)

Imprimir página
5
75E RxTx FEED ASSEMBLY
Assure that O-Ring is in place and seated
in groove of RxTx Feed Assembly.
Fasten Wave Guide Bend to RxTx Feed Assembly
with M4 x 16 mm Philips Head Screws and Lock
Washers. Tighten securely.
RxTx FEED
ASSEMBLY
M4 LOCK
WASHER
(4 PLACES)
M4 x 16mm
PHILIPS HEAD
SCREW
(4 PLACES)
6
75E RxTx FEED ASSEMBLY
Attach LNB and BUC to Feed Assembly
as illustrated. (LNB and BUC are provided
by Customer).
LNB
(CUSTOMER
PROVIDED)
NOTE: Assure that O-Rings are in place for BUC and LNB installations. Screws are provided for BUC assembly.
7
Insert Support Arm Into notch located on bottom of
Reflector. Attach Support Arm to Reflector with
M8 x 70 mm Hex Head Screw, Lock Washers, Flat
Washer and M8 Hex Head Nut. Tighten securely.
SUPPORT ARM
75E CO-LOCATED FEED ASSEMBLY
Insert O-Ring into recessed area of Co-Located Feed Assembly. Fasten
Wave Guide Bend to Co-Located Feed Assembly with M4 x 16 mm
Philips Head Screws and Lock Washers. Tighten all hardware securely
including hardware for BUC bracket and Wave Guide Bend.
WAVE
GUIDE
BEND
INSERT O-RING
FEED
ASSEMBLY
BUC
(CUSTOMER
PROVIDED)
DETAIL
VIEW
REFLECTOR
M8 FLAT WASHER
M8 LOCK
WASHER
M8 x 70 mm
HEX HEAD
SCREW
7
CO-LOCATED
FEED ASSEMBLY
O-RING
WAVE
GUIDE
BEND
M4 LOCK
WASHER
(4 PLACES)
M4 x 16mm
PHILIPS HEAD
SCREW
(4 PLACES)
75E CO-LOCATED FEED ASSEMBLY
LNB
(CUSTOMER
PROVIDED)
BUC
BRACKET
CO-LOCATED
FEED ASSEMBLY
BUC
(CUSTOMER
PROVIDED)
M8 HEX
HEAD
NUT
M8 LOCK
WASHER