Electrolux DXK5500 Manual do utilizador - Página 29

Procurar online ou descarregar pdf Manual do utilizador para Campânula de ventilação Electrolux DXK5500. Electrolux DXK5500 36 páginas.

Imprimir página

Special accessories

Active carbon filter

When the hood is used in recirculation mode an

active carbon filter should be used.

Installation

Unpacking

Check that the cooker hood has no damages.

Transportation damages should immediately be

reported to the one responsible for the transport

Damages, faults and eventually missing details

should immediately be reported to the seller.

Take care of the packing material so that small

children cannot play with it.

Placement

The hood is to be mounted to a wall cabinet.

When installed, the hood must be not less than 65

cm. above electric burners or 75 cm. above gas or

mixed-fuel burners. (Fig. 5).

Electrical connection

The hood has a power cord with moulded plug

with earth connection to be connected to a wall

outlet of 230 V.

The power cord length is 1,4 m.

Fastening the removable drawer

Fasten the removable drawer N using the six

2.9x16 screws U supplied in the accessory kit

(Fig. 6).

Remove the door to simplify this operation.

Mounting of hood to wall cabinet

● Drill on the bottom of the cabinet as indicated

on the drilling scheme (Do not consider the

thickness of the front door of the cabinet when

positioning the scheme).

● In vented exhaust hoods, make a Ø130-135 mm

hole both on the bottom and top of the cupboard

for the discharge pipe.

● From inside the cupboard, insert the four 4.2x35

screws M supplied in the accessory kit (Fig.7)

and screw them to the top of the hood.

● If the cupboard is deeper than the hood , fit the

spacer P and fix it on the back side of the hood

with two screws T and washers (Fig. 7)

The spacer is reversible to cover a gap of 1÷4 cm.

Order by the retailer

PNC 942 122 093

Fig. 5

Fig. 6

Fig. 7

Min

75 cm

65 cm