Electrolux DXK5500 Manual do utilizador - Página 30

Procurar online ou descarregar pdf Manual do utilizador para Campânula de ventilação Electrolux DXK5500. Electrolux DXK5500 36 páginas.

Exhausting mode

● Fit the coupling flange with non-return smoke

valve so that point B of the flange matches up

with the small triangle A which is printed on the

body of the appliance (Fig. 8).

● Connect the air outlet to the smoke exhaust hose

● Check that lever G is positioned on setting "A"

(Fig. 9).

● Refit the suction grid.

Attention! In the horizontal runs the duct must be

slightly slanted (about 10°) and directed upwards

to vent the air easily from the room to the outside.

The hood cannot be connected toflues

of other appliances that run on

energysources other than electricity.

Please, keep to the provisions of official directives

regarding the question of fumes discharge.

Recirculation mode (with carbon

filter)

The air is filtered through a carbon filter and

recirculated into the room through the front grid.

● Open the suction grid

● Turn lever G to setting "F" (Fig. 9).

● Fit the carbon filter as a cover of the inlet grid

of the fan motor (the carbon filter has a side

"cutted", this side must match the external side

of the hood - see Fig. 10), to fix the carbon filter

turn clockwise the central handle E (Fig. 10 -

turn about 90°) .

● Refit the suction grid.

This version is used when there is no exhaust duct

for venting outdoors or when it is impossible to

install one.

Fig. 8

Exhausting

Abluft

Evacuation

Aspirante

Fig. 9

Fig. 10

Recirculation

Umluft

Reciclage

Filtrante

90°