Electrolux EFC 6450 Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Campânula de ventilação Electrolux EFC 6450. Electrolux EFC 6450 14 páginas. Electrolux cooker hood

Imprimir página

Installation

Mounting accessories included

1 deflector, 6 wood-screws 6 x 70 mm,

6 wall plugs Ø 10 mm, 10 nuts, 8 metal screws 3x9 mm,

6 metal screws 4 x 8 mm, 10 metal screws 3x9 mm,

1 reduction flange Ø 125-120 mm

Wall unit mounting - Fig. 8 - 9 - 10

Expansion plugs are provided to secure the hood to most

types of ceilings. However, a qualified technician must verify

suitability of the materials in accordance with the type of

ceiling. The ceiling must be strong enough to take the weight

of the hood.

During electrical connection ensure the power supply is

disconnected at the domestic main switch.

• Adjust extension of the hood support structure, as the final

height of the hood depends on this, and remember that

with installation completed the hood must be at least 50

cm above the cook-top for electric cookers and 65 cm for

gas or mixed cookers.

• Fix the two sections of the structure using 8 screws (2).

• Place the ceiling hole diagram directly above the cook-top

(3 - the center of the diagram must match the center of

the cook-top and the edges must be parallel to the sides of

the cook-top – the side of the diagram with the wording

FRONT corresponds to the control panel side). Prepare

the electrical connection.

• Drill as shown (6 holes for 6 wall plugs – 4 plugs for

fixture), screw the outer screws leaving a space of about

1 cm. between the screw head and the ceiling (4).

• Fit an exhaust pipe inside the truss (5) and connect it to

the motor compartment connection ring (exhaust pipe and

fixing brackets are not supplied).

• Hook the frame onto the 4 screws (6 - see also step 4).

CAUTION! The side of the truss with connection box

corresponds to the side of the control panel with hood

assembled.

• Tighten the 4 screws (7).

• Insert and tighten another 2 screws in the

remaining free holes (8) for secure fixing.

• Carry out the electrical connection (9) to

the mains power supply, only turn on the

power supply upon completion of assembly.

• Hook the hood onto the truss (10) ,

ensuring it fits properly – to hook the hood

onto the truss partially tighten 4 screws

(see also step 12).

• Secure the hood to the truss using two

screws (11); this will also help center the

two sections.

• Tighten the 4 screws securing the truss to the hood (12).

Fig. 8