Atlantic Technology 224 SR Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Sistema de altifalantes Atlantic Technology 224 SR. Atlantic Technology 224 SR 8 páginas. System 220 high performance loudspeaker system

Imprimir página

Models 221 LR, 223 C, and 224 SR

Figure 1:

Speaker Wiring

Terminals

on the speaker. Look carefully at the wires you are using and note that one of the wires

in each pair is marked by either a different color, printing, ridges, or a thread inter-

twined with the wire strands. Conventionally, the marked wire is connected to the

red (+) terminal.

Figure 2:

Typical wiring

diagram for

speakers in a

home theater.

Amplifier or Receiver

Whether your are connecting a complete System 220, or adding one speaker compo-

nent to your present system, the wiring should look like the diagram in Figure 2. Before

turning on the amplifier, be certain that no stray wire strands are touching across the

two terminals as this might damage your amplifier.

Finally, check the polarity of your front speakers by listening to some music. If the

sound seems hollow, spread out and has weak bass, recheck your connections for proper

polarity and reverse the connections if necessary.

–

Left Front Speaker

Center Front Speaker

+ –

Dolby Pro Logic

Left

Center

Front

+ –

Left Surround Speaker

You can connect your System 220 speakers by using

spade lugs or "banana" connectors, or by removing 1/2"

of insulation from each wire end, twisting the strands

of wire together, placing the wire through one of the

post holes and screwing down the nut tightly.

It is important to observe polarity while making speaker

connections: red (+) terminals on the amplifier to red

(+) on the speaker, black (-) on the amplifier to black (-)

Right Front Speaker

+ –

Left

Right

+ –

Rear

Right

+ –

Front

Right Surround Speaker

+ –

tlantic

TECHNOLOGY