Bosch 8 Series Manual do utilizador e instruções de instalação - Página 13

Imprimir página

Bosch 8 Series Manual do utilizador e instruções de instalação

9 Timer

You can set the time on the timer. Once this time has

elapsed, a signal tone sounds. You can set a maximum

time on the timer of 24 hours.

The function works independently of the operation and

other time-setting options. The timer signal is different

from other signals.

9.1 Set the timer

Press

⁠ .

a The display shows the timer.

Use the control ring to set the timer duration.

Press

⁠ .

The timer also starts automatically after a few

seconds.

a The timer counts down.

a After a short time, the display switches back.

a In addition, a timer symbol is shown on the display.

10 Basic settings

You can configure the basic settings for your appliance

to meet your needs.

10.1 Changing basic settings

Requirement: The appliance is switched off.

Press and hold for approx. 3 seconds.

a The display shows information about the process.

Use

to confirm this information.

a The first setting "Language" appears on the display.

Turn the control ring to change the setting as re-

quired.

Press

⁠ .

a The next setting appears on the display and you can

use the control ring to change it.

Use

to work through all of the information and, if

required, use the control ring to make changes.

To save changes, press and hold for approx. 3

seconds.

a The display shows a notification confirming that the

settings have been saved.

Note: Your changes to the basic settings will be re-

tained even after a power failure.

10.2 Discarding changes to the basic

settings

▶

Press

⁠ .

a All changes are discarded and not saved.

a Once the timer duration has elapsed, a signal tone

sounds.

Press

to end the signal tone early.

9.2 Changing the timer

Press

⁠ .

a The display shows the timer.

Use the control ring to change the timer duration.

Note: If an operating mode with a set duration is run-

ning, this duration is highlighted. You can use

lect the timer. The timer duration is highlighted for a

short time. You can change the timer duration.

9.3 Cancelling the timer

▶

Reset the timer duration.

a Once this is implemented, the symbol no longer

lights up.

10.3 Overview of the basic settings

This is where you can find an overview of the basic set-

tings and factory settings. The basic settings depend

on the features of your appliance.

Notes

¡ Changes to the language, button tone and display

brightness settings take effect immediately. All other

settings do not take effect until you save them.

¡ Your changes to the basic settings will be retained

even after a power failure. Only the settings pertain-

ing to the initial start-up of the appliance need to be

implemented once again following a power failure.

→ "Initial use", Page 8

Basic settings Selection

Language

Set "Language"

Time

Set "Time "

Audible signal

Short cooking time

Medium cooking time

Long cooking time

Button tone

Switched off

Switched on

Display bright-

The display brightness can be adjus-

ness

ted in 5 settings

Setting 3

Clock display

Switched on

Switched off

Night-time dim-

Switched off

ming

Switched on (display dimmed

between 10 p.m. and 6 a.m.)

Factory setting (may vary according to model)

Timer en

to se-