Alert 750R Manual do Proprietário - Página 12

Procurar online ou descarregar pdf Manual do Proprietário para Arrancador remoto Alert 750R. Alert 750R 15 páginas. Remote engine starter with alarm system

Imprimir página
Setting).
Note : Press the
battery.
B. THE REMORE LCD ICONS WITH FUNCTION:
Door Lock
Your vehicle doors are locked
Armed Mode
Your vehicle is in armed mode
Remote Transmission
You are transmitting the signal to
control unit
Door Open Warning
Doors are illegally opened (Zone 3)
Shock Sensor Trigger
Trigger on Shock Sensor (Zone 4)
Engine Starting
Your vehicle engine starting by
remote control
Timer Control Start
Engine start automatically at the
same time next day or every 2 /
3-hour.
Activate Channel 3 (Trunk
C3
Release).
Activate Channel 5
C5
Time Monitor
Count Down Timer
Reminder when time is up for
parking
Vibration Mode
Remote Control vibrates when the
system is triggered
Driver paging
Someone is paging you in front of
your vehicle
C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER:
Transmitter Button
F
(1 second)
F
(3 seconds)
F
(5 seconds)
-
-
F
F
F
-
F
(2-second)
-
F
(2-second)
-
F
(2-second)
750R OP
button two times when the battery compartment is empty, then insert the new
Description
LCD screen lamp turns on for 5 seconds.
Timer Programming Mode.

Power Save Mode

Clear the Flash Icon and Melody Sound on
the LCD Screen Transmitter
Button Lock ( ) enable / disable
(
Melody / Vibration
Program Count Down Timer
/ 20M / 30 M /1Hour /1.5H / 2.0H)
C4
C6
)
Mode
( )
(10-Minute
12
MAY/03/2004
Door Unlock
Your vehicle doors are unlocked and
the system is Disarmed
Valet Mode
All the function shall be temporarily
on hold.
In – Range Indicator
Your are within the remote control
range.
Trunk/Hood Trigger
Trunk or Hood is illegally opened
(Zone 2)
Warn Away trigger
Trigger on Shock Sensor (Zone 1)
Engine Running
Your vehicle's engine is running
Temperature Monitor
Indoor temperature of your vehicle
Activate Channel 4
Activate Channel 6
Alert Alarm
You have set morning call alarm
Power Save Mode
Save the battery power

Button Lock

Disable the transmission function
temporarily
Low Battery
You have to replace the battery of
remote control.
Operation
Press and hold for 1 second
1 melody sound to confirm enters.
Press and hold for 3 seconds
2-melody sounds to confirm enter.
Press and hold for 5 seconds
1 melody sound to confirm enters.
Press within 3 seconds
Press within 3 seconds
Press within 3 seconds
Press within 3 seconds cycling
*leave the buttons starting count
down then
flashes