Advanced Screenworks Mystic Series Manual de instruções de instalação - Página 13
Procurar online ou descarregar pdf Manual de instruções de instalação para Ecrã de projeção Advanced Screenworks Mystic Series. Advanced Screenworks Mystic Series 13 páginas. Motorized screens
Imprimir páginaG. HOW TO: SYNCHRONIZE A 2
MOTOR:
1. PRESS AND HOLD THE STOP BUTTON ON THE PRIMARY HAND HELD REMOTE. THE MOTOR
WILL JOG OR BEEP 5 TIMES. RELEASE THE STOP BUTTON.
2. PRESS AND RELEASE THE UP BUTTON ON THE 2
3 TIMES TO CONFIRM THAT THE 2 REMOTES ARE SYNCHRONIZED.
H. HOW TO: PAIR A REMOTE TO A MOTOR OR RE-SYNCHRONIZE A MOTOR AND REMOTE THAT
HAVE BECOME DELINKED
1. DISCONNECT THE POWER FROM THE MOTOR; UNPLUG IF IT IS PLUGGED IN OR TURN OFF
BREAKER IF THE MOTOR IS HARD-WIRED.
2. PRESS & HOLD THE UP BUTTON UNTIL THE LIGHT ON THE REMOTE GOES SOLID.
3. WHILE CONTINUING TO HOLD DOWN THE UP BUTTON, TURN THE POWER BACK ON TO THE
MOTOR: PLUG IT BACK IN IF PLUGGED, TURN ON BREAKER IF HARD WIRED
4. RELEASE THE UP BUTTON AND THEN IMMEDIATELY PRESS & RELEASE THE UP BUTTON
ONCE.
I.
HOW TO: RESET MOTOR & REMOTE; DECOUPLE REMOTE FROM MOTOR; DELETE
PROGRAMMING
1. PRESS AND HOLD THE STOP BUTTON. THE MOTOR WILL JOG OR BEEP 5 TIMES. RELEASE
THE STOP BUTTON.
2. TURN TO THE BACK OF THE REMOTE AND USING A PAPER CLIP/TOOTH PICK/PIN PRESS
THE PROGRAM BUTTON, WHICH IS LOCATED IN THE HOLE FOUND IN THE BACK OF THE
REMOTE. THE MOTOR WILL JOG OR BEEP 3 TIMES TO CONFIRM THAT PROGRAMMING
HAS BEEN DELETED.
ND
REMOTE (EITHER A 2
ND
HAND HELD OR WALL MOUNT) TO THE
ND
REMOTE. THE MOTOR WILL JOG OR BEEP