Anslut 008512 Manual de Instruções - Página 10

Procurar online ou descarregar pdf Manual de Instruções para Luz de trabalho Anslut 008512. Anslut 008512 11 páginas.

Imprimir página
EN

SAFETY INSTRUCTIONS

•
Always switch off the power supply before
installation, connection and service.
•
The product must be connected to an
earthed power supply on installation.
•
The product can be mounted on a surface
of flammable material.
•
Check that the mains voltage corresponds
to the rated voltage on the type plate.
Incorrect connection can result in electric
shock. The electrical installation should be
carried out by an authorised electrician.
•
Never modify the product, this could result
in serious personal injury and will
invalidate the warranty.
•
A damaged power cord or plug must be
replaced by an authorised service centre
or other qualified personnel to ensure
safe use.
•
Keep the power cord away from sharp
edges.
•
Always make sure the mains plug and
power outlet are protected from rain and
moisture.
•
The product must be discarded if the glass
front is cracked.
•
The LED light source is not replaceable.
When the light source has reached the
end of its useful life the complete product
must be replaced.
WARNING!
•
This product becomes very hot during
use. Risk of burns. Keep combustible
materials away from the product.
•
Ensure good ventilation to provide
adequate cooling for the product.
•
The minimum distace to an illuminated
object is 1 metre when the product is
switched on.
10
SYMBOLS
The product must be
discarded if the glass
front is cracked.
The minimum distace to
an illuminated object is 1
metre when the product is
switched on.
Approved in accordance
with the relevant
directives.
Recycle discarded product
as electrical waste.

TECHNICAL DATA

Rated voltage
Output
Protection rating
Luminous flux
Colour temperature
DESCRIPTION
1.
Lock to adjust height
2.
Hinge
3.
Thumb screw
4.
Spotlight
FIG. 1
230 V ~ 50 Hz
50 W
IP65
3750 lm
4000 K