Anslut 411128 Instruções para o utilizador - Página 16
Procurar online ou descarregar pdf Instruções para o utilizador para Aquecedor Anslut 411128. Anslut 411128 17 páginas. Oil filled radiator
Imprimir página
Installation
Remove all parts from the packaging.
1.
Turn the appliance upside down.
2.
Put the feet on the radiator.
3.
Lock the feet in place with the supplied U-shaped screws and wing nuts.
4.
Tighten the screw connections.
5.
Turn the appliance upright and stand it on its feet.
Positioning
NOTE: Check that the mains voltage corresponds to the rated voltage on the type plate. Do not place the
appliance closer than 90 cm to furniture, curtains or other flammable materials.
1.
Check that the temperature control is set to 0 and the switches are switched off.
2.
Plug in the power cord.
3.
Set the required temperature with the temperature control. Turn the temperature control clockwise
for higher temperature and anticlockwise for lower temperature. The status light goes on.
Power modes
1.
When switch I is switched on the status light for mode I goes on.
2.
When switch II is switched on the status light for mode II goes on.
3.
When both switch I and switch II are switched on the status light for mode III goes on.
4.
After use, switch all the switches off and turn the temperature control to 0 and unplug the power cord.
NOTE: Switch off the appliance, unplug the power cord and wait until the appliance has completely cooled
before moving. Use the handle to move the appliance.
•
Unplug the power cord before cleaning and when the appliance is not in use.
•
Wipe the appliance with a damp cloth, and then dry with a dry cloth.
•
Do not use wax or polish, this can discolour the appliance.
ENGLISH
DESCRIPTION
1.
Temperature selector
2.
Power switch/Output mode selector
OPERATION
MAINTENANCE
13