ATV E-GA08 Manual do Proprietário - Página 9

Procurar online ou descarregar pdf Manual do Proprietário para Veículo todo-o-terreno ATV E-GA08. ATV E-GA08 17 páginas.

important to keep the tire in good condition any time and use the correct size and standard

tire to replace the old ones.

Guide:

Tire assembly and disassembly

It is strongly recommended that the tire assembly and disassembly should be done by

an authorized technician with necessary skills.

Tire inflating pressure

It is very important to keep the tire in proper pressure and check the tire pressure before use.

The inflating should be done while the tire is cold.

Tire maintenance

Tire tread depth should be checked regularly.( Shallower tread means less grip of tire). You

must stop to use the vehicle if the tire is pierced, disassemble the tire and check it

carefully. Tire maintenance should be done by an authorized technician. Tire should be

replaced immediately when it is distorted or damaged.

Tire replacement

It is important to use the correct size and standard tire as per our specification (see details

in technical specification sheet)

Don't use the used tire if you are not sure its previous service condition.

Tire aging

Tire aging is unavoidable even the tire is not ever used or just used a few times. Tire aging

is mainly reflected in the cracked section on side of tire and tire tread, sometimes the tire is

distorted as well. The used and aged tire should be checked and confirmed if it is ok to use

again by an authorized technician

Assembly illustration and instruction

一、ASSEMBLE REAR WHEEL

Put the pin(D) into the groove on the axle.

Fix the wheel(A) through the axle.

Mount the spring washer (C) and then tighten

the nut(B) securely with 22mm open end

wrench

Rear wheel

B. Nut M14 2pcs

Φ14

Washer

2pcs

Pin 2pcs