AU Qua phone PX Manual básico
Procurar online ou descarregar pdf Manual básico para Telemóvel AU Qua phone PX. AU Qua phone PX 3 páginas.
Imprimir página
Preface
Thank you for purchasing the "Qua phone PX" (simply
called the "product" from here on).
Before using the product, be sure to read the supplied
"Setting Guide", "Notes on Usage", "Basic Manual"
(this manual) or "User Guide 取扱説明書 詳細版 (Full
Instruction Manual)" (Japanese) available on the au
homepage to ensure correct use. After you have
finished reading this manual and the printed manuals
supplied, be sure to store them in safe places so that
you can retrieve them whenever needed. If you lose
the printed manuals (supplied), contact an au shop or
Customer Service Center.
Basic Manual
For detailed operation methods, refer to "Basic Manual" application installed on
the product.
May 2016, 1st Edition
MBM65403002(1.0)
For inquiries, call:
memo
• In this manual, screenshots for body color "White"
Customer Service Center
are provided as examples.
For general, charge, operations
(toll free)
• In this manual, except as specified, the descriptions
Business hours 9:00 – 20:00
(7 days a week)
From fixed-line phones:
From au cell phones:
of operation procedures are those with keys/
0077-7-111
157
area code not required
buttons.
PRESSING ZERO WILL CONNECT YOU TO AN OPERATOR
• Descriptions in this manual are based on the
AFTER CALLING 157 ON YOUR au CELL PHONE
operations of portrait screen. Menu items/icons/
For service canceling procedure in case of loss or theft
(toll free)
buttons on a screen may be different from the
Business hours 24-hour (7 days a week)
ones in the horizontal display.
From fixed-line phones:
From au cell phones:
0077-7-113
113
area code not required
• In this manual, operation procedures are described
based on au Basic Home. When the home
In case above numbers are not available,
0120-977-033
application is changed by "Select Home" etc.,
(except Okinawa)
operation procedures may be different.
0120-977-699
(Okinawa)
• Items, title levels, and icons in this manual may look
Keitai Guarantee Service Center
different based on different functions you use or
different conditions, etc.
For loss, theft or damage
(toll free)
Business hours 9:00 – 20:00
(7 days a week)
It is very dangerous to charge
• In this manual, "microSD™ memory card",
the product in a wet state,
From fixed-line phones/au cell phones,
this could cause abnormal
"microSDHC™ memory card" or "microSDXC™
0120-925-919
heat generation or a burnout.
memory card" is called "microSD memory card" or
Cell phone and PHS operators collect and
"microSD" for short.
recycle unused telephones, batteries and
battery chargers at stores bearing the
• All of the indicated amounts exclude tax unless
logo regardless of brand and manufacturer
to protect the environment and reuse
otherwise specified.
valuable resources.
Sold by: KDDI CORPORATION,
OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: LG Electronics Japan Inc.
Manufactured by: LG Electronics Inc.
Attaching/Removing au Nano IC
Card 04
Attaching■au■Nano■IC■Card■04
Before attaching the au Nano IC Card 04, make sure
to turn the product off.
Hook the groove with your fingernail and open
a
the card slot cover in the direction of the
arrow to open it.
Hook the projecting part of the tray with your
c
fingernail and pull it out straight to remove the
tray from the main unit.
Insert the IC card opener for LGV33 (sample)
b
into the hole for extracting tray and slowly
push it in the direction of the arrow.
The microSD memory card/au Nano IC Card 04
tray is pushed out.
- 13 -
to show the charging is starting. When the
Charging with the Specified AC Adapter
charging is finished,
(Sold Separately)
When charging is completed, remove the
c
Describe how to charge by using the common AC
microUSB connector of the common AC
adapter 05 (sold separately).
adapter 05 (sold separately) straight from the
For details on the specified AC adapter (sold
external connection terminal of the product
separately), refer to "Introduction of Related
Remove the power plug of the common AC
Accessories".
d
adapter 05 (sold separately) from power
Insert the microUSB connector of the common
a
outlet
AC adapter 05 (sold separately) straight into
the external connection terminal of the product
memo
• Insert the microUSB connector straight with the "▲"
When■ ■is■not■displayed
mark facing up.
• Wait until
is displayed on the status bar of
External
the top screen. Bad connection is assumed if it
connection
does not appear after a while. Check if Common
terminal
AC Adapter 05 (sold separately) is securely
connected. If it still does not appear, stop charging
and contact an au shop or a Secure cell phone
microUSB connector
support center.
("▲" mark facing up)
Insert the power plug of the common AC
b
adapter 05 (sold separately) into a 100 V AC
power outlet
On the status bar of the screen top,
is displayed
- 20 -
List of Packaged Items
Before your start using the product, make sure that
you have all the following packaged with the product.
●Main unit
● IC card opener for
LGV33 (sample)
● 設定ガイ ド (Setting
Guide) (Japanese)
● ご利用にあたっての注意事
項 (Notes on Usage)
(Japanese)
● 取扱説明書 (Basic
Manual) (Japanese)
● 保証書 (Warranty)
(Japanese)
The following items are not included in the package.
●microUSB cable
●AC adapter
●microSD memory card
●Earphone
memo
• Purchase a specified charger (sold separately).
• The battery is built into the product.
• The illustrations of the cell phone in the manual
are used only for explaining. They may differ from
the actual product.
- 2 -
- 1 -
Names and Functions of Parts
c
d
g
e
《Top side》
h
a
b
f
《Bottom side》
《Front side》
《Left side》 《Right side》
- 7 -
- 8 -
Hole for
extracting
tray
IC card opener for
LGV33 (sample)
Projecting part
Put the au Nano IC Card 04 into the tray with
d
the IC (metal) part downwards, insert the tray
into the main unit, and then push it all the way
straight into the slot.
• Note the direction of the notch.
• Insert the au Nano IC Card 04 so that it is tightly
attached to the tray.
• Make sure that there is no gap between the tray and
the main unit.
- 14 -
- 15 -
Charging■with■a■PC
is displayed.
Insert the microUSB connector of the
a
microUSB cable (sold separately) directly into
the external connection terminal of the product
• Insert the microUSB connector straight with the "B"
mark facing up.
Insert the microUSB connector of the
b
microUSB cable (sold separately) straight into
the USB port of the PC
External
connection
terminal
b
a
microUSB cable (sold separately)
USB port of a PC
memo
• Although charging with the power of the product
on is available, it takes longer.
• It may take longer to charge with USB than the
specified AC adapter (sold separately).
• When the "Start new hardware search wizard"
window appears, select "Cancel".
- 21 -
- 22 -
About Operating Instructions
Downloading Manuals
You can download the English version of the
●取扱説明書 (Basic Manual) (Japanese)
Basic Manual from the au website (available from
approximately one month after the product is released).
Handles only basic operations for main features. For
detailed descriptions on various functions, refer to the
You can find "Basic Manual" (English excerpts from
"Basic Manual application" installed on the product
Instruction Manual) on au homepage.
or "User Guide 取扱説明書 詳細版 (Full Instruction
Download URL: http://www.au.kddi.com/support/
Manual)" (Japanese) available on the au homepage.
mobile/guide/manual/
http://www.au.kddi.com/support/mobile/guide/
* You can use the English version of the manual from
manual/
the Basic Manual application.
• All company names and product names in this
manual are either trademarks or registered
trademarks. The
TM
,
®
marks may be omitted in this
manual.
Basic Manual application
You can use the "Basic Manual application" on the
product to confirm detailed operational procedures.
Certain functions can be directly activated from the
application screens on which their operations are
described.
● Operation procedures
On the Home screen u [au Supports] u [Basic
a
Manual]
• When you activate for the first time, follow the
onscreen instructions to download and install the
application.
- 3 -
Earphone■jack
a
External■connection■terminal
b
Proximity■sensor/Light■sensor
c
Inward-facing■camera■(lens)
d
LED■Notification
e
Mouthpiece■(Microphone)
m
q
f
Earpiece■(Receiver)/Sub■microphone
g
Display■(Touch■panel)
n
r
i
h
k
Volume■key■(UP/DOWN)
i
o
s
Card■slot■cover
j
Inside the cover, there are trays and slots for the au Nano IC
Card 04 and microSD memory card.
Power■key
k
t
Strap■hole
l
j
Built-in■antenna■(Wi-Fi
m
l
Photo■light
n
u
p
o
《Back side》
Speaker
p
Built-in■antenna■(Call,■Internet,■GPS)
q
Outward-facing■camera■(lens)
r
Built-in■antenna■(FeliCa/NFC)
s
Vent■hole
t
Built-in■antenna■(Call,■Internet)
u
* Do not cover the built-in antenna with your hand or
put stickers etc. Call/data communication quality
becomes worse.
- 9 -
Removing■au■Nano■IC■Card■04
Notch
Before removing the au Nano IC Card 04, make sure
Tray
to turn the product off.
Hook the groove with your fingernail and open
a
the card slot cover.
IC
Insert the IC card opener for LGV33 (sample)
b
into the hole for extracting tray and slowly
push it.
The microSD memory card/au Nano IC Card 04
tray is pushed out.
Hook the projecting part of the tray with your
c
fingernail and pull it out straight to remove the
Close the card slot cover, push part firmly
○
e
tray from the main unit.
and make sure that there is no gap between
the cover and the main unit.
- 16 -
Turning the Power On/Off
Lock Screen
This■screen■is■displayed■when■turning■the■power■on■
Turning■the■Power■On
or■sleep■mode■is■canceled.
On■the■Lock■screen,■you■can■check■the■date■and■
Power key (Press and hold for more than 2
a
time,■and■notification■information■as■well■as■use■
seconds)
application■shortcuts.
The lock screen appears.
Swipe the screen to unlock.
Status■bar
a
Date■&■time
b
Turning■the■Power■Off
Address■Book■Plus
c
Displays various
Power key (Press and hold for more than 2
a
information registered
seconds)
in the Address Book.
You can also display
[Power off] u [POWER OFF]
b
information about
favorites and contacts
that you contact
frequently in the
notification area.
Notification■information
d
New informaiton such
as a missed call, auシェ
アリンク (au ShareLink)
etc.
Application■shortcut
e
Swipe to launch an
application.
* The application
- 23 -
Regarding Notations Used in This
Manual
■ Key/button■indications
■
In this manual, keys/buttons are represented by
simplified illustrations as shown below.
Volume key
■ Description■of■operations■for■selecting■item/icon/
■
button■etc.
The notations used for operation procedures in this
manual are as follows.
Tap means to lightly touch and release the button or
icon shown on the display to select it.
Description
On the Home
Tap
screen u [
] u
of Home screen. Tap
[1] [4] [1] u [
]
then tap
- 4 -
au Nano IC Card 04
The■au■Nano■IC■Card■04■contains■a■phone■number■
and■other■information.
• The product is
compatible with au Nano
IC Card 04.
memo
• Note the following points, which may cause
®
,■Bluetooth
®
)
*
malfunction or damage, when handling the au Nano
IC Card 04.
■Mark
- Do not touch the IC (metal) part of the au Nano
IC Card 04.
*
- Insert in the correct direction.
- Do not use force to attach or remove the IC
*
card.
*
• When the au Nano IC Card 04 is not attached
properly or the au Nano IC Card 04 is abnormal, an
error message appears.
• Do not lose the au Nano IC Card 04 after it has
been removed.
• Do not insert the au Nano IC Card 04 with a
conversion adapter. Doing so may cause a fault.
- 10 -
Remove the au Nano IC Card 04, insert the
d
tray into the main unit, and then push it all the
way straight into the slot.
• Make sure that there is no gap between the tray and
the main unit.
Close the card slot cover, push it firmly, and
e
make sure that there is no gap between the
cover and the main unit.
- 17 -
Unlocking■the■Lock■screen
Swipe on the lock screen
a
The Home screen appears.
• The unlock method differs depending on the screen
lock settings.
Setting Application Authority
a
When■activating■the■applications/functions■that■
b
access■the■functions■or■information■of■the■product■
for■the■first■time,■the■confirmation■screen■appears■to■
c
request■the■permission■for■the■access■authority.
d
When■the■confirmation■screen■appears,■confirm■the■
content■and■tap■"DENY"■or■"ALLOW".
Example:■To■activate■Photo
On the Home screen u [Google] u [Photos] u
a
[ALLOW]
The application launches.
e
shortcuts to display
can be changed.
- 24 -
Description
Explanation
On the Home
Tap
on the bottom of Home
screen u " "
screen.
■ Illustrations■and■screen■displays■
■
Illustrations and screens shown in this manual may
look different from the actual product or screen.
Power key
In some cases, minor details or a part of a screen
may be omitted.
Actual screen
Screen in this
manual (example)
In this manual,
icons, etc. of
a screen are
omitted.
Explanation
(Phone) on the bottom
,
,
.
- 5 -
- 6 -
■ When■au■Nano■IC■Card■04■is■not■inserted
■
When the au Nano IC Card 04 is not inserted, the
following operations are not available.
• Making a call
/receiving a call
*
《au Nano IC Card 04》
• Receiving/sending and initial settings of e-mail (@
ezweb.ne.jp)
• Receiving/sending SMS
• Checking the phone number and mail address of this
product.
IC (metal) part
• Setting up SIM card lock
Besides the above, some functions requiring your
phone number might not be available.
* Emergency calls to 110 (Police), 119 (Fire department
or ambulance service), 118 (Japan Coast Guard), and
157 (Customer Service Center) are also not available.
However, when the signal strength is other than "out
of service area" during GSM/UMTS/LTE roaming,
calling is available (calls may not be connected
since emergency call numbers differ depending on
countries).
■ Restriction■settings■with■PIN
■
You can set the product to restrict the use of the
product by others through changing the PIN code
or locking the SIM card in order to protect your
important private information while you are using your
au Nano IC Card 04.
- 11 -
- 12 -
Charging
When■you■purchase■your■cell■phone,■the■internal■
battery■is■not■fully■charged.■Charge■the■internal■
battery■when■you■use■it■for■the■first■time■or■when■its■
battery■is■not■enough.
memo
• While charging, the product and its internal battery
might become hot (when activating camera or
communicating data while charging, the internal
battery becomes hot).
• It may take longer to charge the internal battery
when you use camera function, etc. while charging
the battery.
• Operating with the specified charging equipment
(sold separately) being connected might cause
short-time charge/discharge repeatedly. Life of
the internal battery becomes shorter when you
repeatedly charge it frequently.
- 18 -
- 19 -
memo
• If the application authority is not allowed,
applications/functions may not be activated or
using functions may be restricted.
• To change the authority setting, on the Home
screen u [基本機能 (Basic functions)] u [Settings]
u [Apps] u select the application to be changed u
[Permissions] u [
]/[
].
• The explanation screen may be displayed
depending on the application/function.
Also, the confirmation screen may be displayed
several times or the display may be different.
Carefully check the displayed content and follow
the onscreen instructions.
• In this manual, description of the confirmation
screens may be omitted.
- 25 -
- 26 -