Elite Acoustics Engineering D6-58 Manual rápido - Página 10
Procurar online ou descarregar pdf Manual rápido para Amplificador Elite Acoustics Engineering D6-58. Elite Acoustics Engineering D6-58 13 páginas. 120w lithium battery powered acoustic amplifier with 6 channels, digital mixer & effects, and bluetooth
Imprimir página
1.
To fully charge a unit –
a. Set Battery Switch to "CONNECT"
b. Turn Power Switch OFF
c. Connect "AC" adaptor to Power Jack.
d. Blue "Charge" LED should be lit, Charge time is about 5-6 hours.
2.
When unit is powered with "AC" adaptor, Battery Switch should be in "CONNECT"
If unit is always plugged in, it is recommendate to put Battery Swtich in
position.
Disconnected position, but make sure to recharge unit monthly.
3.
Battery Switch should be on "DISCONNECT" when unit is packed for transit or unit
is in storage. Make sure battery is fully charged before UNIT is put into storage. We
recommend fully charging the battery at least once each month.
4.
Lithium Iron Phosphate (LifePO4) battery lifetime is typically 3 – 4 years depending on
usage.
5.
Recharge Battery every month if not in use.
•
Battery TYPE - LifePO4
•
Battery METER indicators -
•
•
FULLY CHARGED. - GREEN LED ON (will turn off once unit is in use)
•
NORMAL - GREEN ON
•
NORMAL and LOW -- Both LEDS are ON less then (about 10% - 25%)
•
LOW - RED ON (less then 10%)
•
CHARGING - BLUE LED ON. (will turn off when Fully Charged)
•
•
For Maximum Battery Life
•
- Recharge when battery is low. 5
•
- Drain & recharge battery at least once a month
•
- Do not leave power switch in the "ON" position when it is not in use.
•
- Keep unit in a cool, dry place away from extreme temperatures
•
- Do not service, modify, or replace the battery
•
- If the battery fails to charge, contact Elite Acoustics
•
•
If unit is always plugged in, it is recommendate to put Battery Swtich in Dis-
connected position, but make sure to recharge unit monthly.
EAE BATTERY & RECHARGING INFORMATION
FOR MAXIMUM BATTERY LIFE