Dunlop CBM95 Cry Baby Mini Wah Instruções de configuração - Página 2
Procurar online ou descarregar pdf Instruções de configuração para Pedal de música Dunlop CBM95 Cry Baby Mini Wah. Dunlop CBM95 Cry Baby Mini Wah 2 páginas.
Imprimir página
CBM95
CRY BABY
MINI WAH
®
POWER
• By rocking your foot back and forth
on the pedal, you can instantaneously
®
The Cry Baby
Mini Wah is powered by
change the effect that the Cry Baby Wah
one 9-volt battery (accessed via the bottom
has on the tone of your instrument.
of the pedal), an AC adapter such as the
• Located under the rocker at the heel of
Dunlop ECB003/ECB003EU, or a DC
the pedal is an adjustable torque clutch.
Brick
power supply.
™
Turn clockwise to increase resistance or
counterclockwise to decrease resistance
SETUP INSTRUCTIONS
(Wrench included).
• Run a shielded instrument cable
• Internal VOICING switch allows you
from your guitar to the CBM95's
to change the frequency range of the
INSTRUMENT jack.
CBM95. To access, remove bottom
plate. Default setting is H—High, for
• Run another shielded instrument cable
the standard GCB95 sound. For a more
from the CBM95's AMPLIFIER jack into
vintage, midrange-focused sound, set
your amplifier input.
the switch to M. For a lower frequency
•
on the
Turn
and begin playing.
range, select L.
•
turn the pedal on/off, push the toe of
To
the pedal down until you feel a "click."
SAMPLE SETTINGS
LOW
See Diagram A
VINTAGE
GCB95
DIAGRAM A
SPECIFICATIONS
Impedance
Input
800 kΩ
Output
10 kΩ
Resonant Frequency
Heel Down
350 Hz - 450 Hz
Toe Down
1.5 kHz - 2.5 kHz
Maximum Level
Input
-8.0 dBV
Output
+10 dBV
Maximum Gain
Heel Down
+19.5 dB
Toe Down
+19.0 dB
Bypass
True Hardwire
Noise Floor
*
Heel Down
-98 dBV
Toe Down
-89 dBV
Current Draw
900 µA
*A-weighted, OdBV = 1V
RMS