AUDIOFOCUS EVO10 Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Sistema estéreo AUDIOFOCUS EVO10. AUDIOFOCUS EVO10 16 páginas.
Introduction
Thank you for purchasing AudioFocus©. That product is designed and made in Belgium with the highest quality
control and reliability. We hope you'll be fully satisfied by this device.
EVO(a) serial has been designed for small to middle fixed or touring applications. Our main philosophy is that each
model is available in active or passive version. This manual is made for both versions and is divided in three
subsections: active, passive, and a third section for EVOSubXXa-flex.
Thanks again and good reading, AF team
What's the difference between EVO and AudioFocus competitors?
-
Special EQ
The EVOa integrates more HiFi dynamic features. At the same time, EVOa has flat response for several presets. We
worked very hard on the ''extended'' preset to give possibility to use the EVOa tops without any subs. We use our
own DSP technologies to achieve that point of schedule and reach very high spl and low cutoff frequencies.
-
New AudioFocus transducers
The other main difference is that we designed our own transducers with very precise electro-mechanicals
parameters to reach the best stability as possible, and have low distortions and very good transient response in small
cabinets. These loudspeakers have been developed with state of the art companies such as Ciare, Sica or Faitalpro to
achieve high quality transducers you can only find in AudioFocus' EVO(a) range.
-
Wedge/monitor application
The EVO top models can be used for front stage or as wedge (mirror configuration) as described here below:
In asymetrical configuration, the difference of path between acoustical sources and singer may occur in audio
confusions. In symetrical configuration the there's no delay between the two cabinets. Image of the sound is better
and more precise.
2
EVO(a) series user's manual