Danish Interpretation Systems DCS 6000 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Sistema de conferência Danish Interpretation Systems DCS 6000. Danish Interpretation Systems DCS 6000 13 páginas. Digital conference system
Também para Danish Interpretation Systems DCS 6000: Manual do utilizador (19 páginas), Manual do utilizador (10 páginas), Manual do utilizador (14 páginas), Manual do utilizador (14 páginas), Manual do utilizador (18 páginas), Manual do utilizador (14 páginas)

Danish Interpretation Systems

6 Technical Specifications

6.1
Technical specifications
Sound quality ..... 20 bit audio @ 32 kHz sampling frequency
Digital Section
Output signal type ........... ground lifting transformer balanced
Analog Section
Nominal output level: ............................ 0 dBm at nominal input
Max. Output level: ..................................................................... 15 dBm
Frequency response ............................................................ 50-16kHz
Signal to noise ratio: ............................................................ >85 dBA
Total harmonic distortion: ................................................... < 0.1%
Power requirement ........................................................... 24-48 V DC
General
Power consumption .................................................... 2W maximum
Power supplied from .................. CU 61xx / EX 6010 / PS 6000
Temperature to guarantee specified performance
.................................. 5 Deg C. to 40 Deg C. (35 to 80 % humidity)
6.2

Connection Details

The DCS 6000 system uses Cat5e, Cat6 or Cat7 F/UTP
DCS-LAN Chain
or U/FTP cables with screened RJ45 connectors.
EIA 568-B wiring shall be used.
Important: The names of Cat5/6/7 cable type have
changed.
Old name
FTP
STP
UTP
Important: Use only F/UTP or U/FTP (screened) cables
and screened RJ45 connectors and not U/UTP cable, which
are unscreened.
How to wire a Cat5e (EIA 568-B) cable to a RJ45 con.:
12
New name
F/UTP
U/FTP
U/UTP
USER MANUAL AO 6004 REV B.DOCX
............................. -20 Deg C. to 60 Deg C. (10 to 80 % humidity)
Storage temperature
Weight ............................................................................................. 0.84 kg
Dimensions (W x H x D) ......... 180 (205) x 38 x 120 (120) mm
Dimensions in bracket are including brackets
DCS-LAN network ......................................................... 2 pieces RJ45
Connectors
Analog outputs connectors ............. 4 - XLR3 male connectors
By using SW 6000 the user can control the following
Remote Control commands in/out
settings in the AO 6004 through the CU 6105/CU6110.
* .................................... Channel number for each output channel
* ....................................................... Volume setting for each channel
* The settings can only be read or controlled from the SW
6000.
Specifications are subject to change without notice.
Pin
Function
1
In-going +
ORG/WHT
2
In-going -
ORG
3
+48V
GRN/WHT
4
0V
BLU
5
0V
BLU/WHT
6
+48V
GRN
7
Outgoing -
BRN/WHT
8
Outgoing +
BRN
Important: If other color codes are used then the four pairs
are connected as follows:
Pair 2:
Pin 1 & 2
Pair 3:
Pin 3 & 6
Pair 1:
Pin 4 & 5
Pair 4:
Pin 7 & 8
User Manual
Connector #1
Connector #2
ORG/WHT
ORG
GRN/WHT
BLU
BLU/WHT
GRN
BRN/WHT
BRN