Audionet AMP II MAX Manual do Proprietário - Página 4
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Audionet AMP II MAX. Audionet AMP II MAX 13 páginas.
Também para Audionet AMP II MAX: Manual do Proprietário (13 páginas)
Imprimir página
Inputs and outputs
For connecting or removing any units the AMP II MAX must be
switched off.
Please make sure that all cables are in absolute best condition. Broken
shields or short-cut loudspeaker cables could damage your loudspeakers
or the amplifiers!
Inputs
At first please connect your pre amplifier to the inputs of your AMP II
MAX. For audio input you can use balanced (XLR) as well as unbalanced
(cinch) cables. For connections longer than 10 m we recommend bal-
anced cables.
Please don't forget to activate the selected input in the set menu.
Speakers
Now connect your speakers to one pair of the gold plated output jacks of
your AMP II MAX. You may use pure wires or "banana" plugs.
Check the polarization of the speakers cables:
Usually the speaker jacks are labeled "+" and "-". You will find the same
label at your AMP II MAX.
Wrong polarization will lead to severe loss of sound quality!
The speaker impedance must not be less than 4 W !
Though your AMP II MAX is effectively protected against shorted
speaker jacks it has to be switched off while working on speakers and
speaker cables!
Bi-Wiring
Your Audionet AMP II MAX supports bi-wiring of loudspeakers. Con-
nect your speaker with two separate cables to each AMP II MAX. Using
the bi-wiring method to connect your speakers can lead to enhanced
sound quality.
4