audiophony ZONEAMP4120 Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Amplificador audiophony ZONEAMP4120. audiophony ZONEAMP4120 13 páginas. 120w/100v rackable multizone mixer/amplifier with 8 inputs and 4 outputs
Imprimir páginaZONEAMP4120 - 120W/100V Rackable multizone Mixer/Amplifier with 8 inputs and 4 outputs
6 - Connectors
6.1 - Microphone inputs
The microphone inputs are accessible via XLR chassis and can receive both balanced and unbalanced low-level signals
Both low-impedance condenser and dynamic microphones can be connected (channels 1 to 4).
CAUTION: Connecting unbalanced sources while the phantom power supply is activated will cause
severe damages to your devices due to the voltage delivered via pins 2 and 3.
1
3
3 = Coldspot (-)
6.2 - Line-level inputs
Mono line-level inputs are accessible via Jack or RCA chassis and can receive both balanced and unbalanced signals.
These inputs can be connected to CD players, MP3 players, Tuners or cassette players.
When connecting unbalanced sources, you will be required to connect the ring to the body.
You can also use the RCA inputs to connect CD or MP3 players, etc.
CAUTION: Turn the volume of affected channels at their minimum before connecting line-level signals
to prevent serious damages to your amplification system.
Sleeve
Ring
Sleeve
Balanced
2
1 = Ground
2 = Hotspot (+)
Balanced TRS
Ring
Coldspot (-)
Sleeve
Tip
Ground / Shield
Hotspot (+)
Tip
Unbalanced TS
Sleeve
Tip
Tip
Ground / Shield
Signal
Unbalanced
2
1
1 = Ground
3
Shunt between
1 and 3 pins
Unbalanced TRS
Shunt between
Sleeve
ring and sleeve
Ground / Shield
Tip
Ring
Sleeve
Unbalanced RCA
Sleeve
Ground / Shield
English
2 = Hotspot (+)
Tip
Hotspot (+)
Center
Signal
Page 9