Abus Secvest FU8006 Manual rápido

Procurar online ou descarregar pdf Manual rápido para Sistema de segurança Abus Secvest FU8006. Abus Secvest FU8006 2 páginas.

Secvest QuickGuide installation

Please observe all country-specific safety instructions. The 230 V mains

power supply should only be connected by trained specialist

personnel.

Remove both housing screws from the bottom side of the

Secvest.

Fold the front housing side upwards and carefully pull the

ribbon cable from the PSU.

Fix the base plate on a suitable surface using the screws and

wall plugs provided.

Overview of the base plate:

No.

Description

Cable clamp (tension relief) for the 230 V AC mains line

Connection socket for the connection cable

230 V AC mains connection

Connection clamps for wired zones and outputs

Install the 230 V mains connection with the power supply

disconnected and attach the cable clamps.

Optional: Install the wired detectors to the zone inputs using

Optional:

the resistors provided and/or connect the relay outputs, when

required. For further information, consult the installation

instructions.

Overview of the rear side of the Secvest:

No.

Description

Internal siren

Battery compartment

Internal loudspeaker

Connection for the analogue telephone line (PSTN)

Kickstart and Codes Defaulted jumper (KS + RESET)

Connection for external loudspeaker and microphone

Connection for extension modules (ISDN / GSM / ethernet /

GPRS)

Connecting cable between base plate and top part

Loudspeaker volume control

USB port

Optional:

Optional: Connection for external loudspeaker (16 Ohm) and

Optional:

external microphone -> item no. FU5230

Optional: To use the integrated dialler, connect the analogue

Optional:

line to the A/B connections. The return line can be connected

to A1/B1. The C/E connections are not used.