Audiovox UCD101 Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Recetor para automóvel Audiovox UCD101. Audiovox UCD101 14 páginas.

Imprimir página

OPERATION

SWITCHING ON/OFF THE UNIT

Switch on the unit by pressing any button

(except

RELEASE button (7) and

button (4)). When system is on, press

POWER button (9) to turn off the unit.

FACEPLATE RELEASE

Press

RELEASE button (7) to detach

the removable faceplate.

SOUND ADJUSTMENT

Press SEL button (10) to select the desired

adjustment mode. The adjustment mode

will change in the following order:

By pressing the VOL+/- button (11)/(12), it

is possible to adjust the desired sound

quality.

LOUDNESS

Press LOUD button (2) to reinforce the

bass output. Press it again to release this

function.

SET THE CLOCK

Press the DISP button (15), the clock is

shown on the LCD display. Then hold

down the button until the clock flashes.

Then press the

hours or

button (16) to change

minutes.

MUTE

Press MUTE button (3) to mute down the

sound instantly. If any button is pressed in

the mute state, the mute state is released.

EQUALIZATION

Press

button

equalization function and to select desired

audio mode. There are five kinds of mode

as below:

→FLAT→CLASSICS→POP M→ROCK M→DSP OFF

DISPLAY (8)

Exhibit current frequency and activated

functions on the display (8).

+button (17) to change

(19)

turn

REMOTE SENSOR (OPTIONAL)

Point the remote control handset to the

remote sensor IR (26). Press the function

keys on the handset to control the system.

RESET FUNCTION

RESET button (28) must be activated with

either a ballpoint pen or thin metal object.

The RESET button is to be activated for the

following reasons:

Initial installation of the unit when all

wiring is completed.

All the function buttons do not operate.

Error symbol on the display.

Note: if press RESET button (28), the unit

can't work yet, please use a cotton swab

soaked in isopropyl alcohol to clean the

socket on the front panel.

AUXILIARY INPUT FUNCTION

The unit can be connected to a portable

audio player through the AUX in jack (27)

on the front panel.

RADIO OPERATION

SWITCHING TO RADIO MODE

Press MODE button (6) shortly to select

radio mode, the radio mode appears in

the display together with the memory

band and frequency.

SELECTING THE FREQUENCY BAND

At radio mode, press BND button (13)

to select the desired band.

The reception band will change in the

following order:

SELECTING STATION

Press

(16) shortly to activate automatic seek

function. Press for several seconds until

"MANUAL" appears on the display, the

manual tuning mode is selected. If both

buttons have not been pressed for

several seconds, they will return to seek

tuning mode and "AUTO" appears on

button (17) or

(

button