Apogee 11056017 Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição Apogee 11056017. Apogee 11056017 13 páginas. Blot transfer systems
Imprimir página5.0 CARE AND HANDLING
5.1 MATERIALS AND CARE
Each apparatus is fabricated from high quality formed PVC/Acrylic and machined acrylic plastic. Both
have very good heat, impact, and chemical resistance but will not withstand autoclaving or dry-heat
sterilization.
All components may be washed with water and a detergent. To remove grease and oils, use a hexane,
kerosene, or aliphatic naphtha. Never use abrasive cleaners, window sprays, or any fluid that may
contain toluene, methylene chloride, phenol, acetone, benzene, halogenated hydrocarbon solvents, or
undiluted laboratory alcohols.
For replacement parts, call your distributor or Apogee Technical Support.
5.2 GENERAL SPECIFICATIONS
Type
Dimensions (W × L x H)
Weight
Gel Dimensions
Construction
5.3 TECHNICAL SUPPORT AND SERVICE
Should you have any problems with this unit, please contact:
Apogee Designs, Ltd.
Attn: Electrophoresis Support
101 Kane Street
Baltimore, MD 21224 USA
Phone: 443.744.0368
Fax:
410.633.3666
Email:
5.4 INSTRUCTIONS FOR RETURN SHIPMENT
IMPORTANT:
Before sending the unit back to us, it is absolutely necessary to call our Technical
Support department to get authorization to return products!
Return only defective devices. For technical problems which are not definitively recognizable as
device faults please contact Apogee Technical Support.
Apogee Electrophoresis | 101 Kane Street | Baltimore, MD 21224 USA | apogeephoresis.com
H11.14 Casting System
17.6 23.2 cm
0.37 kg
11 x 14 cm
PVC/Acrylic, acrylic
9 to 5PM EST, Monday through Friday
H20.25 Casting System
26.7 x 34.0 x 5.6 cm
0.72 kg
20 x 25 cm
PVC/Acrylic, acrylic