ADE M600620 Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Balanças ADE M600620. ADE M600620 16 páginas. Electronic bed scale

Hold function

The determined weight could be continued being displayed even when the load has already been removed.

That enables taking care of the patient first before reading the results.

To use the hold function the scale must be at standstill. The standstill status indicator

appears at the digital display. Deactivate the HOLD function by pressing the key again.

The BMI figure is an index showing the ratio between height and weight.

body weight

BMI=

(height)²

display. Use the numerical key pad to enter a new value for the height (in cm) or retain the value, which is

already been displayed. Confirm the value entered with the ENTER key or delete same by using the CLEAR

key. After the entry has been confirmed by the ENTER key, the BMI value will be calculated using the weight on

the scales. The display changes between weight value and BMI value "b xx.x" (every two seconds) for a period

of 3 minutes. Press the BMI key (11) to cancel before this time has expired.

Evaluating Body Mass Index

BMI evaluation according to WHO

BMI

18.5

BMI

18.5

BMI

The scales must be at standstill, e.g. standstill status display

Press the ENTER key (13) to send the data to the serial interface.

Note: Printing is not possible if the net weight is 0. The print function only produces one print-out. A reset is

required to print out another copy.

Remove the mains plug before cleaning the unit. Do not use any aggressive cleaning materials for cleaning;

only use a damp cloth or conventional disinfectant. Ensure that no liquids or any fluid gets into the scale.

To determine this value you need the height of the person.

Start the scale and weigh the person following the steps under weighing. Then

press the BMI key (11) to start BMI mode. The last value entered appears on the

Severely underweight

Moderately underweight

Slightly underweight

Normal weight

Overweight

Obese Class I

Obese Class II

Obese Class III

(14) appears at the screen.

M600620-210422-Rev006-UM-e

(14) is on and Hold