Airwheel R3 Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Bicicleta Airwheel R3. Airwheel R3 16 páginas.

Parking note:

When you get off, the power switch should be turned off in case of pushing the accelerator by accident

making it out of control.

The power should be turned off when parking.

For your riding safety and for the R3's superb condition, please maintain and clean it regularly.

Adjustment and maintenance:

Newly purchased vehicles should be adjusted in good condition, if there is any question, please refer to

the aftersales staff.

The adjustment method of the brake is the same as the ordinary bicycle. The key is not only to be

able to brake effectively, but also to release the brake without block (otherwise it will consume a large

amount of electric energy) and make sure the brake-power off function is effective.

To replace tires, it is the same as ordinary bicycle. Due to the rear wheel hub and circuit, riders need

to pay attention to the lines and press the two screws in the rear axle. The torque of the rear wheel is

recommended ≥ 30N.m, the front wheel ≥ 18N.m.

Have a maintenance and a comprehensive examination every 800 km. check whether the front and

rear wheel screw is locking, check whether the pattern of cover tyre is worn; check whether the tire

pressure is appropriate, the drive system is smooth, and each part of the joint is normal: check whether

the brake line zip-fastener is used in lubrication. And inject suitable amount of lubricant to the central

axis, the front axle, rear axle, ﬂywheel, fork, rotating parts and brake wiring. 40# oil and butter as a

lubricant are recommended.

In the use and maintenance, if you find that you cannot solve the problem, please contact the aftersales staff.

Unauthorized demolition of Airwheel caused the failure and damage, is not in the company's free warranty.

When the vehicle is used for a period of time, it should be requested professional or designated service

station for a comprehensive inspection and adjustment to ensure the comfort, safety and normal service life.

Rotate to loosen the nuts. Adjust the nut forwards or backwards to find the suitable looseness. When

adjusting the chain, it must also be aligned with the rear nut and adjusting nut and keep the front and rear

wheels in a straight line. After adjustment, refasten the nut in the rear wheel, lock the adjusting nut to have

a final check. The chain sag between the two chain wheels should be 10~15. Clip mouth is back to the

installation.

Adjusting nut

The right side of the bike

The left side of the bike

- 09 -

Rear nut