Great Little Trading Blake L5357 Manual de instruções de montagem - Página 9
Procurar online ou descarregar pdf Manual de instruções de montagem para Mobiliário de interior Great Little Trading Blake L5357. Great Little Trading Blake L5357 11 páginas. Storage bench
Imprimir página
STEP 12:
Position the unit as shown to mount the flat runners on the
RH faces of the panels.
Start with the central divider (C) and position 1x flat
runner (#10) as shown with the wheel at the front of the
unit on the lower edge. Fix in place with 2x runner screws
(#9). When in place the runner will be level with the front
of panel C.
Now attach 1x flat runner (#10) to the RH side panel (D),
again with the wheel at the front and on the lower edge.
Fix in place using the holes shown with 3x runner screws
(#9). When in place the runner will sit back 15mm from the
front edge of panel D.
#9
C
#9
#9
#9
Hardware for Step 12:
5x #9 Runner Screws
2x #10 Flat Runners
Remarque:
Note:
GBR
Il est important
It is important
d'utiliser les trous
to use the screw
de vis illustrés,
holes shown or
sinon vos glissières
your runners
ne seront pas
will not sit in the
placées dans la
correct position.
bonne position.
Hinweis:
Nota:
DEU
D
Es importante
Es ist wichtig,
utilizar los orificios
die abgebildeten
para tornillos
Schraubenlöcher
zu verwenden,
que se muestran
#9
sonst sitzen Ihre
o las guías no se
#9
Läufer nicht in der
asentarán en la
posición correcta.
richtigen Position.
#10
#9
#9
#10
#9
#9
STEP 13:
Now mount the flat runners on the LH faces of the
panels.
Start with the central divider (C) and position 1x flat
runner (#11) as shown with the wheel at the front of
the unit on the lower edge. Fix in place with 3x runner
screws (#9). When in place the runner will be level with
the front of panel C.
Now attach 1x flat runner (#11) to the LH side panel (E),
again with the wheel at the front and on the lower edge.
Fix in place using the holes shown with 3x runner screws
(#9). When in place the runner will sit back 15mm from
the front edge of panel E.
FRA
ESP
#11
#9
9
Hardware for Step 13:
6x #9 Runner Screws
2x #11 Flat Runners
E
#9
#9
#9
C
#9
#9
#9
#9
#9